Voice Terminal Type

DESCRIPTION

ADMINISTRATION

When the system is first set up, the system recognizes all analog stations except the administrator/attendant console as BIS/HFAI voice terminals, that is, voice terminals with raised plastic buttons. As part of basic administration, you must identify for the system any analog station jacks used for non-BIS/HFAI voice terminals, which have flat membrane buttons.

Voice terminals with flat membrane buttons (non-BIS/HFAI models) include the 5-button, 10-button, 34-button, and 34-button deluxe voice terminals.

Voice terminals with raised plastic buttons (BIS/HFAI models) include the HFAI-10, BIS-10, BIS-22, BIS-34, BIS-34D, SP-34, and SP-34D voice terminals.

To specify which station jacks are connected to voice terminals with flat membrane button voice terminals and which station jacks are connected to voice terminals with raised plastic buttons, enter administration mode and follow the appropriate procedure below.

With a MERLIN II System Display Console

1 From the administration mode, touch [Stations], [More], [BIS/HFAI] .

2 Touch the Auto Intercom buttons until the green lights show the appropriate code:

Green light on = raised plastic button voice terminal

Green light off = flat membrane button voice terminal

3 Touch Conference to return to the administration menu, or leave

administration mode.

With a BIS-34D Console

1Touch Message.

2 Dial # 320.

3Touch the Auto Intercom button until the green light shows the appropriate code:

Green light on = a BIS/HFAI (raised plastic button) voice terminal is connected to this voice terminal jack

Green light off = a flat membrane button voice terminal is connected to this voice terminal jack

4Touch Message and go on to another procedure, or leave administration mode.

MERLIN II System Features 2-167

Page 173
Image 173
AT&T feature module 2 system manual Voice Terminal Type, Description Administration