AT&T feature module 2 system manual Square Line Configuration, Touch Stopwatch

Square Line Configuration

See “Line Assignments in Square Systems”

Stopwatch

DESCRIPTION	If you want to start and stop the timer on your 7406D voice terminal—to time
	how long you spend on a call, for example- you can use your display and
	the Stopwatch feature. When you touch a programmed Stopwatch button,
	the Stopwatch activates the timer on your display screen.
CONSIDERATIONS	● This feature can be used only with the 7406 display voice terminal.
	● The Stopwatch feature starts the clock at :00 on the display and will count
	to a maximum of 9:59:59 (hours: minutes: seconds). When you touch the
	Stopwatch button on your voice terminal to stop the timer, the display
	disappears immediately.
PROGRAMMING	To program a Stopwatch button for your display voice terminal, label a
	button, enter programming mode, and follow these steps:
	1 Touch the button you want to program.
	2 Dial *92.
	3 Program another feature, or leave programming mode.
HOW TO USE	When you want to start the timer on your display:
	1 Touch Stopwatch.
	The timer on your display starts.
	2 When you are finished, note the elapsed time and record it, if necessary.
	3 Touch Stopwatch to turn off the display.

MERLIN II System Features 2-151