AT&T feature module 2 system manual Voice Announcement To Busy Voice Terminal

Voice Announcement To Busy Voice Terminal

DESCRIPTION	The system administrator can assign some voice terminals two consecutive
	station jacks on the control unit so that people at these voice terminals can
	receive voice announcements while they are busy on a call.
CONSIDERATIONS	The system administrator must assign the voice terminal two consecutive
	station jacks on the control unit. This requires special wiring. (See Section
	3, “Installation” in the MERLIN II lnstallation and Administration Manual.)
	The jacks must be an odd-numbered analog station jack and the next
	higher even-numbered analog station jack. The odd-numbered station jack
	provides the station’s intercom number.
	The system administrator can assign either the Voice Announcement To
	Busy Voice Terminal feature or the Simultaneous Voice and Data feature to
	a voice terminal. A voice terminal cannot have both features.
ADMINISTRATION	To identify any station jacks in voice/voice pairs, enter administration mode
	and follow one of the procedures below.
	With a MERLIN II System Display Console
	1 From the administration menu, touch [Stations], [More], [More] [VceSgnl] .
	2 Touch either of two adjacent Auto Intercom buttons until the green lights
	next to both buttons show the appropriate code:
	Green light on = station jack is part of voice/voice pair
	Green light off = station jack is not paired
	3 Touch Conference to return to the administration menu, or leave
	administration mode.
	With a BIS-34D Console
	1 Touch Message.
	2 Dial # 210.
	3 Touch either Auto Intercom button for the voice/voice pair until the green
	lights next to both buttons show the appropriate code:
	Steady green light on = station jack in voice/voice pair
	Green ligh off = station jack not in voice/voice pair
	4 Touch Message and go on to another procedure, or leave administration
	mode.

2-166MERLIN II System Features