Hobart ML-126182, ML-126181 Set Point Arrows, Set Point Indicator Light, Control Circuit Fuse

Temperature Display	—	Displays actual oven cavity temperature during cooking cycle.
Set Point	—	Press to display set temperature.
Set Point Arrows	— 1. Press the Set Point button so that the set point is displayed, and
		at the same time, press the Set Point Arrows up or down until the
		desired set point temperature appears in the digital display.
		2. Release the Set Point button. The actual oven cavity temperature
		will display.
Set Point Indicator Light —		When lit, indicates that the heat is being provided to the oven. When
		set point is reached, light will go off.
Time Display	— Displays actual cooking time in minutes and tenths of minutes.
Time Range Switch	— Use to set cook time range from 2 to 8 minutes, 8 to 15 minutes, or 15
		to 20 minutes. Switch must be on cook time range desired in order to
		change belt speed.
Belt Switch	— Press switch to ON to start the conveyor belt; press to OFF to stop the
		conveyor belt.
Power Switch	— Press to ON to start the oven; press to OFF to stop the oven. When
		the power switch is pressed to ON, ignition occurs automatically.
Time Knob	— After the Time Range Switch has been set to the desired time range,
		turn the knob clockwise to increase the cook time or counterclockwise
		to decrease the cook time until it reaches the time desired on the time
		display.
Control Circuit Fuse	—	25 Amp. / 250V. Time delay.
Drive Motor Fuses	— 375 ma / 250V.

— 13 —