BEFORE FIRST USE
1.Clean the protective metal oils from all surfaces of the oven.
2.Use a
3.Rinse thoroughly with a clean damp cloth and wipe dry with a soft clean cloth.
•DO NOT hose down the oven.
•Do not use this oven if its controls have been wet. If the controls are wet, contact your Hobart servicer.
LIGHTING INSTRUCTIONS
Turning the Oven On
The burner control is a solid state device that automatically ignites and monitors the pilot flame.
To turn the oven on:
1.Turn the gas combination valve (Fig. 5) to ON.
2.Push the Power Switch to ON.
3.Set the oven temperature to desired temperature.
GAS COMBINATION
CONTROL VALVE
Fig. 5
If the burner fails to light within 90 seconds:
•The burner control will shut off the gas combination valve and will lock out.
•To reset the burner control for restart, press the Power Switch to OFF and then to ON.
If the burner still fails to light:
•Turn the oven off.
•Wait 5 minutes before restarting.
If lockout occurs again, contact your local Hobart authorized servicer.
Turning the Oven Off
Turn Power Switch to OFF.
— 14 —
