Hobart HGC4832, ML-126181, HGC6024, HGC3018, HGC4018, ML-126180, ML-126184, ML-126187 Cleaning, Daily

Models: HGC4824 HGC3624 ML-126182 ML-126185 ML-126186 HGC3632 ML-126183 HGC6032 ML-126187 ML-126184 ML-126180 HGC4018 HGC3018 HGC6024 HGC4832 ML-126181

1 24
Download 24 pages 31.12 Kb
Page 17
Image 17
CLEANING

CLEANING

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY BEFORE CLEANING.

Daily

Clean the outside of the oven daily by wiping with a clean damp cloth.

Avoid using abrasive powders or pads; these cleaners may damage the finish. Clean right-hand and left-hand crumb trays (Fig. 7).

1.Remove and wash in a sink as you would any normal utensil.

2.Replace crumb trays.

Clean center crumb tray (Fig. 7).

1.Remove the front panel.

a.Grasp each side of the door handle and lift up.

b.Swing the bottom of the front panel out.

c.Lower panel and pull away.

2.Loosen the conveyor belt (see Conveyor Belt Removal in this manual) and brush away the crumbs under the belt.

3.Remove crumb tray.

4.Wash in a sink as you would any normal utensil.

5.Replace the tray and the front panel by reversing the procedure.

CRUMB TRAYS

Fig. 7

PL-41127-1

— 17 —

Page 17
Image 17
Hobart HGC4832, ML-126181, HGC6024, HGC3018, HGC4018, ML-126180, ML-126184, ML-126187, HGC6032, ML-126183, HGC3632 Cleaning, Daily