AT&T feature module 2 system manual Reminder Set again, Setting Personal Reminder Times

HOW TO USE	Procedures for setting and canceling Reminder Service calls from attendant
	consoles and from individual voice terminals are somewhat different. Follow
	the appropriate procedure below.
	NOTE: If your console or voice terminal has a display, it shows:
	● the feature status when you enter a feature code or press a feature
	button
	● new settings as you dial them
	You can check an existing setting by touching Reminder Set, verifying
	that the time shown on the display is correct, then touching
	Reminder Set again.

Setting Personal Reminder Times

1	Take the	appropriate	action:
	Touch Reminder		Set.
	Touch Intercom Ring or Intercom Voice.
	Lift	your handset.
	Dial	*81.
2	Dial the 4-digit reminder time in a 12-hour format (1200 through 1159).
3	Dial 2 (A) for a.m. or 7 (P) for p.m.
4	If the light next to Reminder Set goes off, indicating an invalid entry,
	repeat steps 1 through 3.

Canceling Personal Reminder Times

To cancel a reminder that you have set for your voice terminal, touch

Reminder Cancel or follow these steps:

1Touch Intercom-Ring or Intercom-Voice.

2Lift your handset.

3Dial *82.

Setting Reminder Times from Attendant Consoles

1 Touch Reminder Set or lift your handset and dial *81.

2	Touch the Auto Intercom button of the voice terminal for which you’re
	setting a time. (This can be your own console. )
3	Dial the 4-digit reminder time in a 12-hour format (1200 through 1159).
4 Dial 2 (A) for a.m. or 7 (P) for p.m.
5	Repeat steps 2 through 4 for each voice terminal.

6 If the light next to Reminder Set goes off, indicating an invalid entry, repeat steps 1 through 4.

7 Touch Reminder Set or hang up.

You can check these settings by touching Reminder Set, then touching each Auto Intercom button in turn. When you’re finished, touch Reminder Set again.

MERLIN II System Features 2-137