Gaggenau BX 480/481 610 manual 3 , End of cooking time, , QgRiFrrnlqjWlph, 

Models: BX 480/481 610

1 44
Download 44 pages 46.22 Kb
Page 21
Image 21
End of cooking time

End of cooking time

You can defer the end of the cooking time until later.

Example: it is 2 pm. The meal takes 40 minutes to cook. It should be ready by 3.30 pm.

Enter the cooking time and shift the end of the cooking time to 3.30 pm. The electronic circuitry calculates the starting time. The appliance starts automatically at 2:50 pm and switches off at 3.30 pm.

Note that easily perishable foodstuffs must not be left in the oven for too long.

Delay end of cooking time

You have set the heat mode, temperature, and cooking time.

1Touch the M symbol.

2Using the C, select 5 "end of cooking time".



(QGRIFRRNLQJWLPH

Change end of cooking time:

Call up timer menu. Using the C, select 5 "end of cooking time". Using the rotary selector, set the preferred end of cooking time. Start with I.

Cancel complete process:

Set program selection to 0.

Set time functions for both ovens simultaneously

Short-term timer and stopwatch are not available when both ovens are in use.

Cooking time and end of cooking time can be set simultaneously for both ovens.

Set a heat mode and temperature for both ovens. Select the preferred oven using Q or R and set the cooking time.

If the cooking time was only set for one oven, the settings will be displayed on the left side of the screen. The Q or R symbols display whether the settings are for the upper or lower oven.

Example: it is 12:00. A 45-minute cooking time is set for the lower oven. The cooking time will end at 12:45.

3Using the rotary selector, set the preferred end of cooking time.

4Start with I.



  )

The appliance will go on standby. The screen will display the mode, temperature, cooking time, and end of cooking time. The appliance will start at the calculated time and will turn off automatically once the cooking time has run out.

Note: If the 6 symbol is blinking: a cooking time has not been set. Always set the cooking time first.

The appliance will turn off after the cooking time has ended. The 5 symbol will pulse and a signal will sound. It will stop when you touch the symbol, open the appliance door, or set the program selection to 0.

3 (QGRIFRRNLQJWLPH  )

4 Set time functions for both ovens simultaneously

The P symbol will bring up an overview. This is where you can select the upper or lower oven.

If a cooking time was set for both ovens, the overview will display the lower oven settings on the left and the upper oven settings on the right side of the screen:

4

 )

5

 

 

 

3   )  )

21

Page 21
Image 21
Gaggenau BX 480/481 610 manual 3 , End of cooking time, Set time functions for both ovens simultaneously, ,