Gaggenau BX 480/481 610 Preparing self-clean pyrolysis, Starting self-clean pyrolysis, 3\URO\VLV

Preparing self-clean (pyrolysis)

9CAUTION

Fire risk! Loose food remainders, fat and roast juice can catch fire. Wipe out the oven interior with a moist cloth.

▯Remove coarse soiling and food remainders from the oven.

▯Clean the door seals manually, the inside of the door and the glass pane because the self-clean (pyrolysis) does not clean these parts.

▯Remove all loose interior parts from the oven interior. The slide-in racks are pyrolysis-proof. There must be no objects left in the interior.

▯Close the oven door.

Starting self-clean (pyrolysis)

1Set the program selector to S.

2The œ symbol is displayed. Confirm with ™.

3The turn-off time for when the self-clean (pyrolysis) will be completed is displayed. If

preferred, the turn-off time can be changed with the rotary selector. Confirm with ™.

4Remove all accessories and coarse soiling from the oven interior. Confirm with ™.

5Start with I. The cleaning time counts down on the screen. If the turn-off time was changed, the time until the self-clean (pyrolysis) starts counts down on the screen. The oven light remains off.

_

 )

3\URO\VLV

After 3 hours, a signal sounds. A message will appear on the screen. Once the appliance is cool, wipe out the remaining ash from the oven with a damp cloth.

Note: The oven door is locked for your safety. After cooling down, the door is unlocked as soon as the temperature has dropped below 390 °F (200 °C).

Set self-clean (pyrolysis) for both ovens

You can set the self-clean (pyrolysis) so that both ovens are cleaned successively.

Between cleaning the first and second oven, the appliance will cool down for approx. 1 hour. Self-clean (pyrolysis) for both ovens takes approx. 8 hours.

To set self-clean (pyrolysis) for both ovens, turn both rotary selectors to S. Then set following the instructions in Start pyrolysis.

Cleaning accessories with self-clean (pyrolysis)

Gaggenau baking trays and grill trays are coated with pyrolysis-proof enamel. To arrive at an optimum cleaning result, you are nevertheless advised to remove all accessories from the oven before the self- clean (pyrolysis). Only this will ensure optimum heat distribution.

If you would like to remove burnt-in residues from your baking tray or your grill tray with self-clean (pyrolysis), it is imperative that you observe the following notes:

Notes

‒Remove extreme soiling, roast juice and food remainders before self-clean (pyrolysis). Food remainders, grease or roast juice can catch fire during self-clean (pyrolysis).

‒Only insert one baking tray or one grill tray in the lowest shelf in the oven.

‒Insert the baking tray or the grill tray fully.

‒Do not clean the wire rack, rotisserie spit, cast roaster, baking stone, core temperature probe or other accessories with self-clean (pyrolysis).

33