Activating the appliance
Standby
The appliance is in the standby mode when no function is set or the child lock is activated.
The control panel's brightness is reduced in the standby mode.
Notes
‒There are various displays for the standby mode. The GAGGENAU logo and the time are set by default. Refer to the section entitled Factory setting if you would like to change the display.
‒The display's brightness depends on the vertical viewing angle. You can adjust the display by way of the "Brightness" setting on the factory settings.
Activate appliance
In order to exit standby mode, you can either
▯Set the function selector,
▯Touch a control panel,
▯or open or close the door.
Now you can set the desired function. Read the appropriate chapters to learn how to set functions.
Notes
‒If "Standby display = off" is selected in the factory setting, you must turn the function selector to exit the standby mode.
‒The standby display appears again if you have not made any settings for a long while after activation.
‒The cooking compartment lighting goes out after a little while if the door is open.
Operating the appliance
Oven interior
The cooking compartment has five shelf levels.
| |
| |
| |
| |
| |
9 | CAUTION |
Do not place anything on the cooking compartment floor. Do not cover it with aluminium foil. A
9CAUTION
Do not slide any accessories between the shelf positions, or they may tip.
Inserting accessories
The accessories feature a latching function. The latching function prevents tilting of accessories when pulling them out. You must insert accessories in the oven interior correctly so that tilt protection will work.
When inserting the rack, make sure
▯that the engaging lug (a) points downward
▯that the rack's safety clip is at the rear and top.
D | D |
|
17
