Assembly Instructions, Battery Operation

XDouble Deluxe™ BreastpumpX

Assembly Instructions

Double Deluxe™ BreastpumpXX


Snap the white membrane					Press the valve assembly	Screw the container		onto
onto	the	valve		until mem-	onto the breastshield.	the breastshield or use dis-
brane lies completely flat.						posable	CSF™ Collection,
Be	sure		to	separate		Storage	& Freezer	Bags
						article #87010 or #87013
membranes			and valves			(sold separately).
when cleaning and com-
pletely		dry		prior to
reassembly.

For single pumping, insert the small plug of the single adapter into the hole on the breastshield and firmly push into the plug-in port on the motor unit. This plug should be inserted into the holder when not in use.

For double pumping, insert the smaller end of the tubing into the plug-in on the motor unit, and the larger end of the tubing into the second breastshield (the one not attached to the motor unit)

Battery Operation

While the pump will work with either alkaline, dispos- able or nicad rechargeable

CAUTION:

When using the pump with batteries, the pumping cycle

Align the raised line on the motor unit with the raised line on the shield and press the motor firmly onto the shield with the single adapter attached.

Lock the motor onto the shield by rotating 1/8 turn clockwise. The white plug- in port on the motor unit should be aligned with the hole on the breastshield.

To install batteries, slide off the battery compartment cover. Install two fresh AA

1.5V batteries (alkaline preferred).

batteries, alkalines are rec- ommended; the pump will cycle more quickly, pump longer and run more quietly.

may slow as the batteries wear down. Slower cycles may cause some discomfort because the vacuum will be held longer on the breast. If this happens, reduce the vacuum with the adjustment regulator and replace the batteries with fresh ones as soon as possible.

NOTE:

The batteries do not need to be removed to use electricity to power the pump.