Assembly & Use:
When making adjustments to your stroller,
WARNING always ensure that all parts of your child’s body are clear of moving parts.
1 | 2 |
Lift storage clip. | Lift handlebar until both side latches “snap” into position. |
|
|
3 | 4 |
Turn the frame face down. Position rear axle assembly so brakes are pointed toward you. Push rear axle assembly firmly onto each leg so that the buttons “snap” into the holes in the wheel brackets.
Position each front wheel assembly onto each of the front legs. Pull back on tab, slide into position and release tab.
IMPORTANT! Pull firmly on all wheel assemblies to be sure that they are securely attached.
5 | 6 |
Weathershield
Snap canopy assembly onto frame by aligning |
| Both canopies are adjustable. Lift or lower each canopy to | |
| desired position. Weathershield under front canopy may be | ||
pin to hole in frame. To remove, gently pull |
| ||
4 | |||
extended to protect baby from the weather. | |||
canopy bracket from frame. | |||
|
|