Char-Broil 11601558 manual Grill Cart Assembly, A8 Cart Bracket A9 Leg End Cap

5 ASSEMBLY GUIDE GRILL CART Assembly

.

Part	Qty
A8– Cart Bracket	1
A9– Leg End Cap	2

1/4x20-2" screw

1/4-20 Nut

(qty 4)

(qty 4)

#10x3/8" screw (qty 2)

A8

#10x3/8" screws

A9

Step 3 - Carefully turn the Cart Assembly over and allow it to rest on the tops of the leg assemblies. Assemble the Cart Bracket (A8) to the Cart Assembly by by inserting 4 each 1/4- 20x2" screws int0 into corresponding holes as shown. Allow the Cart Bracket to rest on the floor, this will help with alignment. Secure with 4 each, 1/4-20 nuts using a small adjustable wrench, not supplied. FINGER TIGHTEN ONLY

AT THIS TIME. The bracket will be tightened in step B2.

Be sure to install Cart Bracket (A8) on the side opposite of the ignition module bracket. Once complete -leave the cart in the upside down position.

Lastly, insert the Leg End Caps (A9) into the front legs and secure with 1 each #10x3/8" screw.

Ignition Module

Bracket

1/4-20x2" screws

Place the Lower Body on the carton pad upside down in preparation for the next step.

Visit www.sizzleonthegrill.com/user-forumsto chat with Patio Bistro® owners just like you!