COMPLETE THE INSTALLATION
❒Stuff the wires into the junction box. Make sure the wires from the fixture go through the wire path, and no wires get pinched.
Slide the fixture onto the | Junction |
mounting screws and | Box |
tighten nuts. |
|
4162 Top Assembly
Larger piece
on top
Optional Assembly
❒If so equipped, you may install the decora- tive tail as shown below.
Hex nut
❒Caulk fixture mounting surface with silicone weather sealant.
❒Install one 100 Watt maximum light bulb.
❒If so equipped, install the fixture top.Secure with decorative screws.
❒If you will not be installing the optional tail assembly, install the decorative nut onto the bottom of the fixture now.
1.Screw in extension bar.
Bottom trim piece 
has drain hole 
2.Add tail piece and trim.
3.Install
decorative nut.
