Char-Broil 11601558 manual Grill Cart Assembly, Supplied, Part Qty

4 ASSEMBLY GUIDE GRILL CART Assembly

Part	Qty
A1– Tank Retainer Ring	1	.
A2– Cart Base	1
A3– Tank Retainer Bolt	1		Wheel Retaining
A4– Front Leg Set	1	1/4x20-1/2"	Clip	3/8-16 Nut
A5– Rear Leg Set	1	screw	(qty 2)	(qty 2)
A6– Wheels	2	(qty 4)
A7– Hubcap	2			Axle Bolt
A1				(qty 2)
A3		1/4-20 Nut
Step 1		(qty 4)

Assemble Tank Retainer Ring (A1) to the Cart Base (A2) by aligning studs into corresponding holes. Secure with 4 each, 1/4-20 nuts using a small adjustable wrench, not

supplied.

A2

Thread the Tank Retainer Bolt (A3) into the Tank

	Retainer Ring(A1)
1/4-20	Nuts
(4 each)
Step 2	Attach Front Leg Set (A4) to the Cart Base (A2) using 2 1/4-20 screws. Attach Rear Leg Set (A5) to
	the Cart Base (A2) in the same manner, using 2 1/4-20 screws.
	Attach 2 Axle Bolts to the Rear Leg Set (A5), thread a 3/8-16 nut as shown and tighten securely using

a small adjustable wrench.

Slide a Wheel (A6) over an Axle Bolt and secure using a Wheel Retaining Clip. Repeat for other side. Position and Snap into place the Wheel Hubcaps (A7).

A4

A2

After cart assembly, if your cart does not sit level, use these screws to adjust the cart.

A5	Axle Nut
	3/8-16

Axle Bolt

Wheel

Retaining

1/4-20 Screws

(4 each)

Position wheel

as shown

Clip install after placing wheel on the axle.

A6A7

Visit www.sizzleonthegrill.com/user-forumsto chat with Patio Bistro® owners just like you!