ASSEMBLY continued
3Secure Wheel to Axle as shown:
•Slide Wheel onto end of Axle with brake ribs facing in.
•Slide Wheel Retainer onto end of Axle. Make sure large end of Wheel Retainer is towards Wheel. Wheel Retainer should snap into groove on end of Axle.
•Snap wheel Retainer Cap over Wheel Retainer.
•Line up Hub Cap tabs with slots in Wheel and snap Hub Cap in place.
Axle
Hub | Wheel |
|
Cap |
| |
Retainer | Retainer | Wheel |
Cap |
|
|
CAUTION:
•Failure to install retainer cap may cause wheels to come off of stroller.
•After wheel assembly is complete, pull on wheels to check that they are locked into place.
WARNING
Prevent a possible choking hazard, discard axle protectors and polybag which contained rear wheel parts.
Attaching Cup Holder
Snap one end of cup holder over stroller frame above canopy, rotate down to opposite side and snap in place.
WARNING
•To avoid burns, never put hot liquids in cup holder.
•Avoid possible tipping, DO NOT place more than 3 lbs. (1.4 kg) in cup holder.
4