Baby Trend 7311 manual Brakes, Canopy, To Remove Front Child Tray, To Fold Stroller

Page 6

BRAKES

WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. Never leave stroller unattended on a hill or incline as the stroller may slide down the hill.

1.To engage brakes, apply light downward pressure to the brake lever located on each rear wheel. The stroller may require slight forward or rearward movement in order to line up the teeth on the brake with each wheel brake cluster. See figure 13. Check that the stroller will not move and that the brakes are properly applied. To release, gently lift up on the brake lever. See figure 14.

CANOPY

1.To open the canopy, push forward on the front frame of the canopies. To close canopy, pull the front edge toward the rear of the stroller until folded. Always fold the canopy prior to folding the stroller frame. Please see figure 15.

2.The canopy will ratchet forward or back to block the sun. Pull forward on the front canopy frame tube to move forward. Pull backward on the rear frame tube to move back.

3.To remove the canopy, press the lock button on the end of the male fitting while pulling upward on the canopy. Please see figure 16.

TO REMOVE FRONT CHILD TRAY

1.To remove front child tray, pull forward on the locking lever on the tray arms to unlock. Please see figure 6. Please note that you may attach or remove one end at a time. Also, the tray may be released on either side and will swing away for easy access to your child. Please see figure 7.

TO FOLD STROLLER

Do Not allow children near stroller while folding.

1.Close the canopy as described in the Canopy section above. The canopy may be folded forward to fold the stroller or, if you need to reduce the size of the folded stroller, may be folded back toward the rear of the stroller.

2.Unbuckle rear standing safety belt. Please see figure 10.

3.To fold the stroller slide the red fold latch safety button in the center of the handle and squeeze the red handle while pushing forward on the handle. Once the stroller begins to fold, release the red handle and pull upward on the child tray until the stroller is folded. Please see figure 17.

4.Secure the stroller in the folded position by latching the fold latch, located on the right side of the stroller handle, over the extended rivet on the armrest. You may have to rotate the front wheels to fold the stroller completely. Please see figure 18.

Fig. 13.

Fig. 14.

Fig. 15.

Fig. 16.

Fold Button

Release Button

Fig. 17.

 

Fig. 18.

6

Image 6
Contents Sit N Stand LX Tandem Stroller To contact us Assembly PartsTo Secure Rear Standing Child To Secure Front Childto Secure ChildTo USE Jump Seat To Adapt the Stroller to Carry Infant CAR SeatsSeatback Positioning To Remove Front Child Tray BrakesCanopy To Fold StrollerTo Unfold Stroller Do Not allow children near stroller while unfoldingSit N Stand LX Tandem Stroller Car Seat Chart Snap Bar PositionStep Cosco Designer 22 and Designer Removal of the Cosco Designer 22 and DesignerInstallation of Peg Perego Primo Viaggio Infant Car Seat Peg Perego Primo ViaggioRemoval of Peg Perego Primo Viaggio Infant Car Seat Installation of the Evenflo Cozy Carry Infant Car Seat Evenflo Cozy CarryRemoval of the Evenflo Cozy Carry Infant Car Seat Installation of the Evenflo On My Way Infant Car Seat Evenflo On My WayRemoval of the Evenflo On My Way Infant Car Seat Installation of the Evenflo Embrace Infant Car Seat Evenflo EmbraceRemoval of the Evenflo Embrace Infant Car Seat Installation of the Century Vante Infant Car Seat Century VanteRemoval of the Century Vante Infant Car Seat Installation of the Graco Snug Ride Infant Car Seat Graco Snug RideRemoval of the Graco Snug Ride Infant Car Seat Installation of the Cosco Arriva Infant Car Seat Cosco ArrivaRemoval of the Cosco Arriva Infant Car Seat Seat Installation of the Baby Trend Latch-Loc Infant CarBaby Trend Latch-Loc, Flex-Loc Removal of the Baby Trend Latch-LocInfant Car Seat