Baby Trend 7311 manual Installation of the Evenflo Cozy Carry Infant Car Seat

Page 13

Evenflo® Cozy Carry®

Please follow the following instructions for proper installation of your infant car seat.

Installation of the Evenflo® Cozy Carry® Infant Car Seat

1.Place front seat in the reclined position. With one hand grasp the car seat handle (in its upright, carrying position) and gently place the seat, so that the baby faces the rear of the Stroller, onto the Snap-N-Go attachment system so that the large groove on the seat bottom, nearest the head-end of the seat, hooks over the Snap Bar. Check that the seat locked onto the Snap Bar.

2.Loop the two ends of the Car Seat Strap (attached to the Snap- N-Go frame) over the car seat, half way between the handle and the foot-end of the seat, and snap the two buckles together (see Figure 3). The first time you do this, you will need to adjust the length of the strap for a tight fit around the car seat. FOR SAFE

OPERATION, IT IS VERY IMPORTANT THAT THE CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED OVER THE CAR SEAT.

3.Test for secure installation by moving the car seat in all directions. The car seat should be securely attached to the stroller.

Removal of the Evenflo® Cozy Carry® Infant Car Seat

1.Unlock the Car Seat Strap and remove from over the infant car seat.

2.With one hand, grasp the car seat handle (in its upright, carrying position) and with your other hand squeeze the red handle on the back of the car seat and lift the car seat upward from the Snap- N-Go frame.

Position “5”

Snap Bar

Position “I”

Figure 1.

Figure 2.

Cosco®, Peg Perego®, Primo Viaggio®, Evenflo®, Cozy Carry®, On my Way®, Embrace®,

 

Century®, Vante®, Graco®, Cosco® Arriva® and Snug Ride® are the trademarks of their owners.

 

They are not associated with Baby Trend, Inc. and no approval or endorsement is implied.

13

 

Image 13
Contents Sit N Stand LX Tandem Stroller To contact us Parts AssemblyTo Secure Front Childto Secure Child To Secure Rear Standing ChildTo Adapt the Stroller to Carry Infant CAR Seats To USE Jump SeatSeatback Positioning Canopy BrakesTo Remove Front Child Tray To Fold StrollerDo Not allow children near stroller while unfolding To Unfold StrollerSit N Stand LX Tandem Stroller Snap Bar Position Car Seat ChartStep Removal of the Cosco Designer 22 and Designer Cosco Designer 22 and DesignerPeg Perego Primo Viaggio Installation of Peg Perego Primo Viaggio Infant Car SeatRemoval of Peg Perego Primo Viaggio Infant Car Seat Evenflo Cozy Carry Installation of the Evenflo Cozy Carry Infant Car SeatRemoval of the Evenflo Cozy Carry Infant Car Seat Evenflo On My Way Installation of the Evenflo On My Way Infant Car SeatRemoval of the Evenflo On My Way Infant Car Seat Evenflo Embrace Installation of the Evenflo Embrace Infant Car SeatRemoval of the Evenflo Embrace Infant Car Seat Century Vante Installation of the Century Vante Infant Car SeatRemoval of the Century Vante Infant Car Seat Graco Snug Ride Installation of the Graco Snug Ride Infant Car SeatRemoval of the Graco Snug Ride Infant Car Seat Cosco Arriva Installation of the Cosco Arriva Infant Car SeatRemoval of the Cosco Arriva Infant Car Seat Baby Trend Latch-Loc, Flex-Loc Installation of the Baby Trend Latch-Loc Infant CarSeat Removal of the Baby Trend Latch-LocInfant Car Seat