Mounting Reflectors
1. | Screw reflectors and brackets together. |
|
2. | Loosen screws on reflector brackets. Mount reflectors/ | Bracket |
| ||
| brackets horizontally on rear corners of side frame tubes, |
|
| with reflectors extending out past trailer sides. |
|
3. | Tighten screws securely. Photo 2 |
|
WARNING
MAKE SURE REFLECTORS FACE OUTWARD. INCORRECTLY
INSTALLED REFLECTORS CAN REDUCE VISIBILITY AND CAUSE AN Reflector
ACCIDENT OR SERIOUS INJURY.
PHOTO 2: Trailer left rear corner
Left Side
Frame Tube
Installing Wheel Guards
1.Match holes in wheel guards with holes on outside of lower side frame tubes.
2.From inside the frame, insert wheel guard screws through frame tube and wheel guards. Tighten securely. Figure 3
Screws
Wheel Guard
Lower Side
Frame Tube
figure 3: Wheel guard installation
Attaching Wheels
1.Insert wheel axle assembly completely into trailer axle. Figure 4
2.Close quick release lever, with lever aimed at trailer rear. A properly adjusted quick release lever should leave an imprint on your palm when the lever is rotated to the closed position. Figure 5
3.Verify that tires are inflated to pressure marked on tire
side wall. |
| Trailer |
4. To remove wheel from trailer axle, open quick release lever. |
| Rear |
|
| |
WARNING | Top View | Top View |
figure 4: Quick release lever in unlocked | figure 5: Quick release lever in locked | |
| “open” position | “closed” position |
MAKE SURE WHEELS ARE HELD SECURELY, WITH WHEEL AXLE
ASSEMBLY FULLY INSERTED INTO TRAILER AXLE. YOU SHOULD
NOT BE ABLE TO ROCK OR SHIFT WHEELS. IMPROPERLY
INSTALLED WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR
SERIOUS INJURY.
B U R L E Y H O N E Y B E E O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L