BOB MA0201 operating instructions Stroller Accessories, Limited Warranty

Page 4
Fig. 24
Stroller in fully folded position
Frame
Release Handle
Fig. 23
Pull handle upwards sharply to fold

UAL

(800) 893-2447 www.bobgear.com email- bob@bobgear.com

Phone: (805) 541-2554 Fax: (805) 543-8464,3641 Sacramento Dr. #3 San Luis Obispo, California 93401

 

 

MA0201

13 TIRE PRESSURE: IMPORTANT: Inflation pressure must always fall within the range embossed on the sidewall of the tire (usually 25-35 p.s.i.)

STROLLER CARE and

MAINTENANCE :The fabric

is 100% polyester with a stain

resistant treatment that makes cleanup easy. Use a sponge with a solution of mild

soap and lukewarm water (maximum temperature of 100 degree Fahrenheit). Rinse

thoroughly with clean water to remove soap then air dry. Do not use detergent.

Regular maintenance should include: Verifying tire pressure, verifying that all screws and fasteners

are tight, and wiping parts clean with a rag. To reduce the possibility of

squeaks, periodically apply a small amount of lubricant (Triflow, 3- in-one, or light sewing machine oil) to the frame

pivot axle and interior faces of the pivot bracket, as shown in figure 26.

STORAGE: It is best to store your stroller indoors when it is not in use. This will prolong its attractive

appearance. Extended exposure to the sun's ultraviolet rays can fade and damage the fabric, tires, and plastic parts.

CARGO: The stroller

 

 

 

 

is equipped with two

 

 

small pockets for your

 

 

child, a seatback

Handlebar

pocket and a Low Boy

 

 

cargo pouch under the

 

 

stroller. Adding weight

 

 

to the seatback

 

 

changes the center of

Cross Tube

gravity of the stroller,

Wrist Strap

and increases the

Velcro

possibility that it will tip

 

 

over backwards. For

Fig. 25 Secure stroller in folded position

 

this reason, loads in the

 

 

 

 

seatback pocket should never exceed two pounds (1 kg.). Although the seatback is padded, it is important to remember that this is what your child leans against. Never place sharp or injurious objects into the seatback pocket.

Apply Lubricant to Interior Faces of Bracket

LIMITED WARRANTY

BOB Trailers Inc. takes pride in its workmanship and strives to manufacture the best products possible. Therefore, we warranty our Sport Utility Stroller and Sport Utility Stroller D’Lux against defects in material and workmanship subject to the conditions listed below. Since no product is indestructible, it does not cover defects attributable to or resulting from normal wear, abuse or alteration.

Frame is warranted for 5 years.

Components and fabric are warranted for one year. Warranty is only valid for the original purchaser.

Proof of purchase is required to exercise this warranty. Labor and freight charges are not included.

Normal wear, neglect, abuse, accidents, improper assembly or maintenance, or the installation of parts or accessories not compatible with the original intended use of the stroller, as sold, are not covered by this Warranty.

Warranty claims must be made through an authorized dealer. This warranty is limited to the repair or replacement of the defective part. BOB shall in no event be responsible for consequential or special damages.

This Limited Warranty is the only express or implied warranty applicable to BOB. Any implied warranties, including warranties of merchantability and fitness shall be limited in scope and duration in accordance with this limited warranty.

STROLLER ACCESSORIES

Warm Fuzzy Seat Insert - The ultimate in plushness & comfort. Thick, polypropylene fleece will give you and

your child a warm fuzzy!

Your little one will be

dry & comfortable in bad weather, strolling with the BOB Weather Shield!..

Apply Lubricant

to Axle

Fig. 26

Pivot Axle Lubrication

Image 4
Contents Assembly Instructions Sport Utility Stroller OWNER’S ManuUAL Front WheelSeat Safety Shock AbsorbersStroller Accessories Limited Warranty

MA0201 specifications

BOB MA0201 is a cutting-edge module designed to cater to the needs of IoT (Internet of Things) applications through its robust features and versatile technologies. At the heart of BOB MA0201 is the ability to seamlessly connect various devices, enabling efficient communication and data exchange within a network.

One of the main features of the BOB MA0201 is its built-in microcontroller which supports multiple communication protocols, including Wi-Fi, Bluetooth, and Zigbee. This versatility allows developers to choose the best communication method for their specific use case, whether that is for indoor or outdoor applications. Furthermore, the module is designed to operate in both a peer-to-peer network and a centralized hub setup, making it adaptable to different system architectures.

The BOB MA0201 comes equipped with a comprehensive set of sensors, including temperature, humidity, and motion sensors, making it an ideal choice for environmental monitoring and smart home applications. The integration of these sensors allows users to gather real-time data, which can be analyzed to make informed decisions concerning resource management and energy efficiency.

In terms of technology, the BOB MA0201 leverages low-power consumption, enabling long-lasting battery life for portable applications. The module is also compatible with various development platforms, making it accessible to both beginner and experienced developers. With support for popular programming languages, users can easily customize the functionality of the BOB MA0201 to meet their specific project requirements.

Moreover, the module is designed with security in mind, employing encryption protocols to safeguard data transmission. This feature is particularly crucial for IoT applications where data integrity is paramount.

In summary, the BOB MA0201 stands out due to its flexibility in communications, integrated sensor functionalities, low power consumption, and robust security measures. This combination makes it an attractive option for developers looking to build innovative IoT solutions. With its user-friendly design and extensive compatibility, the BOB MA0201 empowers users to harness the potential of connected devices for enhanced automation and control in various applications.