Cuisinart BW-10 Before the First USE, Operation, Using the Bottle Basket, For plastic bottles

BEFORE THE FIRST USE

Carefully unpack the unit and remove any packaging and promotional labels in or on the bottle warmer. Rinse all accessories thoroughly in warm soapy water.

Operation

To warm your baby’s bottle or food, please follow the instructions and the chart below.

NOTE: These instructions are to be used as a guide only. Please note that there are many variables, such as size of the bottle and starting temperature of the food, which can affect the speed at which this unit warms the bottle or jar as well as the final temperature. Adjustments to the instructions below may be

necessary. Always test the temperature of food before feeding baby.

1.Remove the measuring cup from the front of the housing (fig. 1) and fill it with water to the appropriate fill line, according to the chart below.

Bottle Warming Guide

Bottle Capacity	5˚C/40ºF	20˚C/70ºF
4 oz Plastic	10ml	8ml
8.9 oz Plastic	10ml	8ml
4 oz Glass	14ml	8ml
8.9 oz Glass	14ml	8ml
Baby Food 4 oz.	12ml	8ml
Baby Food 6 oz.	12ml	8ml

2.Pour the pre-measured amount of water from the measuring cup directly into the warming chamber (fig. 2).

3. Do not overfill. If too much water is used,

the bottle or jar may be heated for too long a period and reach too high a temperature.

Note: Always make sure there is no water in chamber from previous use. To empty the unit of leftover water, tilt the unit onto its side over the sink. Any extra water will come out.

1 2

USING THE BOTTLE

BASKET

For plastic bottles

1.Put the bottle basket into the bottle- warming chamber (fig. 3, 4). Line up the bottle basket arms with the insets on the bottle warmer housing. In this position the basket will be even/flush with the housing.

3 4

For glass bottles

1.Put the bottle basket into the bottle warming chamber (fig. 5, 6) and turn the bottle basket to a 45-degree angle (basket will slide into place). In this posi- tion the bottle basket will sit about 1 inch above the housing.

5 6

2.Put the bottle into the bottle basket

(fig. 4, 6) and turn the dial to ON position. Blue LED indicator will turn on. The unit will shut off automatically once bottle warming is complete. Turn the dial to the OFF position.

3.Let the bottle sit for 15 to 30 seconds before removing and be extremely careful removing the bottle from the unit. Shake the bottle to distribute the heated con- tents before checking the temperature.

4