EN Philips AVENT Express Bottle and Baby Food Warmer
For baby food jars
1.Ensure basket is in place inside the warmer.
2.Remove the lid and place jar in the warmer.
3.Fill the warmer with water to 15mm (1⁄2 inch) below the top of the jar.
4.Plug the unit into an electrical outlet and click the switch to the ON position (I) Turn the dial to setting 3.
5.The warmer will work in the same way as for feeding bottles. Take care when removing the jar as it, and the water surrounding it, will be hot. Stir the food and test it on a spoon yourself to ensure it is not too hot for your baby. TAKE CARE NOT TO OVERHEAT.
6.If the food is not ready, replace the jar in the warmer. The water surrounding the jar will be kept at a constant temperature but the temperature of the food will continue to increase. TAKE CARE NOT TO OVERHEAT. If the food is too hot, allow to cool. Always test temperature before feeding.
7.Once the food has reached the correct temperature and has been removed from the unit, switch off (O) and unplug from the electrical outlet.
Note: For small jars you can place a screw ring from an AVENT Bottle below the jar before adding the water so that you can remove the container more easily.
Care of your Express Bottle and Baby Food Warmer
Switch off (O), unplug and allow to cool before cleaning. Remove basket and wipe inside and outside with a damp cloth only. DO NOT USE AN ABRASIVE CLEANER. In order to reduce limescale build up, you can use
De-scaling
You should
Pour 2oz ⁄ 50ml of vinegar (white) mixed with 4oz ⁄ 100ml of cold water into the warmer (with basket in place). Allow to stand in the unit until any limescale has dissolved. Empty the unit and rinse thoroughly. Under no circumstances should anything other than vinegar or citric acid be used as it may cause irreparable damage.
Key to product label
FOLLOW OPERATING
INSTRUCTIONS
Philips AVENT is here to help
Call
www.philips.com/AVENT
In US manufactured for Philips Consumer Lifestyle, a division of Philips Electronics North America Corporation. 1600 Summer Street, 5 Fl., Stamford, CT
In Canada imported for Philips Electronics Ltd, 281 Hillmount Road, Markham, ON L6C2S3
| TEMPERATURE OF FOOD BEFORE WARMING | ||
| 5 °C | 20 °C | |
| (40 °F) | (70 °F) | |
2 |
|
| |
1 | 5 min | 4 min | |
3 | |||
2 |
|
| |
1 | 7 min | 5 min | |
3 | |||
|
| ||
2 |
|
| |
1 | 8.5 min | 6 min | |
3 | |||
|
| ||
2 |
|
| |
1 | 5.5 min | 4.5 min | |
3 | |||
2 |
|
| |
1 | 7.5 min | 6 min | |
3 | |||
2 |
|
| |
1 | 5 min | 4.5 min | |
3 | |||
130 g |
|
|
6 | 7 |