Blaupunkt PCA460 manual System Configuration #1, System Configuration #2

Page 10

SYSTEM CONFIGURATION #1

Full-Range

High-Pass

Full-Range

High-Pass

Subwoofer

5 Channel Combo (2ch HP + 3ch passive Multi-Mode)

The multi-mode system is a “poor-man’s” satellite/subwoofer system. This amplifier is able to drive speakers in stereo mode and at the same time drive low frequencies to a

dedicated subwoofer speaker. By inserting inductors (coils) and capacitors, the result is an inexpensive solution to generating a ‘5' channel system with a 4 channel amplifier.

Using passive components (coils and capacitors) the installation is simple and performs adequately for most listeners. Such a system will not perform as well as an “active” system because the slow attenuation (roll-off) of the frequency response resulting in a moderate amount of over-lapping of the sound spectrum between the satellites and subwoofers. It is important to remember that although surprisingly pleasant performance is achieved, this is a compromise system and will NOT perform as well as a dedicated 5 channel system with electronic crossovers.

SYSTEM CONFIGURATION #2

Full-Range

Full-Range

Full-Range

Full-Range

4 Channel (Full-Range,HP)

For many listeners, they need only slightly higher system loudness and/or music dynamic range without the amplifier going into distortion. By simply adding additional power to the speakers this can be achieved in many installations. BUT, the speakers must be able to handle this additional power without damage.

Such installations are most common with listeners who only need systems that can play moderately loud. Also, this consumer is often a person who simply cannot, or will not, accept additional amplifiers or speakers in the vehicle. Such systems will not be able to perform as well as audio systems with additional speakers and amps, but this is often an accepted trade-off for this consumers.

8

www.midwestelectronics.com

Image 10
Contents Page Blaupunkt Specifications PCA460, 4/3/2 Channel Amplifier All power ratings conform to CEA-2006 standardsTable DES Matières Table of ContentsÍndice DAS Matérias PCA Amplifier Benefits & Features Thank YOU for Choosing BlaupunktSafety Concerns Installation WarningsInstallation Tools System PlanningVehicle Wiring Vehicle Fusing+12 Battery TriggerFuses Connections & ControlsLED System Configuration #1 System Configuration #2System Configuration #3 System Configuration #4TROUBLE-SHOOTING Guide Symptom Probable Cause or CorrectionLimited Warranty United States only Blaupunkt Technical Support

PCA460 specifications

The Blaupunkt PCA460 is a sophisticated car amplifier that is tailored for audiophiles seeking to enhance their in-car audio experience. This amplifying unit is engineered with precision, boasting various features and technologies that aimed at delivering superior sound quality and performance.

One of the standout features of the PCA460 is its impressive power output. With a maximum output of 460 watts, it ensures that your vehicle's audio system can reach high volumes without sacrificing clarity. This power is divided effectively across two channels, allowing for a balanced and immersive listening experience. The amplifier supports a wide frequency response, ensuring that every note from deep bass to crystal-clear treble is reproduced beautifully.

The PCA460 incorporates advanced technologies such as MOSFET transistors, which contribute to its efficient thermal performance. This enables the amplifier to operate at optimal levels without overheating, even during extended use. Furthermore, the overload protection feature safeguards both your amplifier and your audio components from potential damage, making it a reliable choice for long-term use.

A noteworthy characteristic of the Blaupunkt PCA460 is its sleek and compact design. The amplifier’s aluminum chassis not only enhances its aesthetic appeal but also aids in effective heat dissipation. This ensures that the unit remains cool during operation, further enhancing its durability and performance in the demanding environment of a vehicle.

Installation of the PCA460 is made simpler with the inclusion of high-level and low-level inputs, allowing it to connect seamlessly with various car audio systems. The amplifier also features adjustable crossover settings, which grant users the ability to fine-tune their sound setup according to personal preferences. This flexibility makes it suitable for a wide range of speaker configurations, ensuring that users can achieve the best audio performance tailored to their unique tastes.

Additionally, the PCA460 is designed with a user-friendly interface. With easy-access controls for gain and frequency adjustment, tuning the sound to meet individual standards becomes an effortless task.

In summary, the Blaupunkt PCA460 is a powerful, versatile car amplifier that provides a significant upgrade to any car audio system. Its high output, robust build, and advanced technologies combined make it an excellent choice for those looking to elevate their in-car listening experience. Whether for casual listening or serious sound engineering, the PCA460 delivers performance and reliability that audiophiles demand.