System Planning, Installation Tools | Blaupunkt PCA460 instruction

SYSTEM PLANNING

Before wiring up an audio system that may not achieve the sound quality you want, be sure to choose a system concept that fits your listening requirements. Basic systems, a receiver with internal 4x20 watts and 4 coax speakers, are adequate for many listeners. But, when you want to really “feel” the music, you will need some kind of subwoofer amplifier/speaker combination. Although many people might jump into an “add-on” amplifier to power to rear coaxial speakers, a better choice is usually a subwoofer amp/speaker system that supplements the existing 4 speaker system as shown in the adjacent drawing. Such a system provides a surprising improvement in sound quality due to the usually dramatic increase in bass response.

The next dramatic step up in performance is with a “multi- channel” system that offers more dynamic range in the mids and highs due to higher power plus more bass response due to multiple woofers and/or more power. But, with such a system, the stereo image and overall listening experience usually becomes much more life-like due to better tonal quality midrange/tweeter speakers and usually better placement.

To build such a system though, complexity goes up due to the addition of passive or active crossovers which take time to install and may inject noise into the system due to potential noise signal pick up. The results though of such a system can be dramatically pleasing.

Full-Range Full-Range

Subwoofer

Full-Range Full-Range

Supplementary subwoofer system

Receiver
	Sat Amplifier
	(4x60 W)
	Passive X-over
Sub Amplifier (2x120 W)	Subwoofers

High performance multi-channel system

INSTALLATION TOOLS

For most installations, simple hand tools are adequate to install an aftermarket amplifier. Depending upon the mounting locations used, you will need power tools for drilling and cutting plastics and metal. A good starting list is summarized below:

■Tape measure and ruler

■Marking pen and starting punch

■Phillips and flat blade screwdrivers (small and medium sizes)

■Nylon wire bundle ties

■Pliers: standard vice-grip and needle nose styles

■Light-duty trim pry-bar for removing door trim

■Cutting shears or nibbling tool for cutting thin and medium gauger metal

■Wire cutters, wire strippers, electrical tape, crimping pliers and appropriate crimp-on terminals

■Power drill with appropriate sized drill bits

–4 –

www.midwestelectronics.com

PCA460 specifications

The Blaupunkt PCA460 is a sophisticated car amplifier that is tailored for audiophiles seeking to enhance their in-car audio experience. This amplifying unit is engineered with precision, boasting various features and technologies that aimed at delivering superior sound quality and performance.

One of the standout features of the PCA460 is its impressive power output. With a maximum output of 460 watts, it ensures that your vehicle's audio system can reach high volumes without sacrificing clarity. This power is divided effectively across two channels, allowing for a balanced and immersive listening experience. The amplifier supports a wide frequency response, ensuring that every note from deep bass to crystal-clear treble is reproduced beautifully.

The PCA460 incorporates advanced technologies such as MOSFET transistors, which contribute to its efficient thermal performance. This enables the amplifier to operate at optimal levels without overheating, even during extended use. Furthermore, the overload protection feature safeguards both your amplifier and your audio components from potential damage, making it a reliable choice for long-term use.

A noteworthy characteristic of the Blaupunkt PCA460 is its sleek and compact design. The amplifier’s aluminum chassis not only enhances its aesthetic appeal but also aids in effective heat dissipation. This ensures that the unit remains cool during operation, further enhancing its durability and performance in the demanding environment of a vehicle.

Installation of the PCA460 is made simpler with the inclusion of high-level and low-level inputs, allowing it to connect seamlessly with various car audio systems. The amplifier also features adjustable crossover settings, which grant users the ability to fine-tune their sound setup according to personal preferences. This flexibility makes it suitable for a wide range of speaker configurations, ensuring that users can achieve the best audio performance tailored to their unique tastes.

Additionally, the PCA460 is designed with a user-friendly interface. With easy-access controls for gain and frequency adjustment, tuning the sound to meet individual standards becomes an effortless task.

In summary, the Blaupunkt PCA460 is a powerful, versatile car amplifier that provides a significant upgrade to any car audio system. Its high output, robust build, and advanced technologies combined make it an excellent choice for those looking to elevate their in-car listening experience. Whether for casual listening or serious sound engineering, the PCA460 delivers performance and reliability that audiophiles demand.