Led

CONNECTIONS & CONTROLS

Line Level Input

Crossover

Mode

Low-Pass Frequency

Power On

Gain Control	High-Pass	Bass Boost	Protection
	Frequency		LED

LINE LEVEL INPUTS & OUTPUTS - The most commonly used inputs & outputs in the aftermarket are RCA type line level inputs. These can handle up to about 6 Volts rms without overdriving the amplifier. Such high voltages are rarely found from car audio head units so this is a very comfortable value. But, should the use need to drive the amp directly from speaker level leads, use the supplied “High Level Adapter” to connect to the amp.

GAIN CONTROL - The gain control allows for a range of 0.3-6Volts input. This means that if the setting is a 0.3V, it only takes 0.3Volts to drive the amp to full output. (Such a low setting allows for the amp to be easily overdriven and more susceptible to noise so a mid-position is highly recommended for most radios.)

CROSSOVER MODE SELECTOR - Depending upon the system design chosen, you need to set the amplifier in the proper “mode” be it LP, Flat, or HP. The low-pass and high-pass frequency settings are explained below. The “Flat” setting simply allows for the amp to pass all audio frequencies without any kind of crossover filter application. (This is common with 6x9” fullrange coaxial speakers for example.)

HIGH-PASS CROSSOVER CONTROL - If the control is in the “HP” position the amplifier passes only mid and high frequency sound. The lower limit for such sound is set via this control. A common setting is just above 100Hz.

LOW-PASS CROSSOVER CONTROL - If the control is in the “LP” position the amplifier passes only low frequency sound. The upper limit for such sound is set via this control. For bass, a value just below 100Hz is usually best.

BASS BOOST - This control provides additional bass in the 45Hz area to give a stronger low end “feel” to the bass. Once switched on, this will also allow the amp to be driven into distortion sooner so the user must be aware.

PROTECTION LED - This light turns on if the amplifier senses a severe problem, such as a speaker short circuit.

POWER ON LED - This light will turn on when the amplifier receives a +12V turn on signal from the radio. If the amp is properly wired, but the light does not turn on, there may be a short circuit condition that the amp is protecting itself from.

– 7 –

www.midwestelectronics.com

PCA460 specifications

The Blaupunkt PCA460 is a sophisticated car amplifier that is tailored for audiophiles seeking to enhance their in-car audio experience. This amplifying unit is engineered with precision, boasting various features and technologies that aimed at delivering superior sound quality and performance.

One of the standout features of the PCA460 is its impressive power output. With a maximum output of 460 watts, it ensures that your vehicle's audio system can reach high volumes without sacrificing clarity. This power is divided effectively across two channels, allowing for a balanced and immersive listening experience. The amplifier supports a wide frequency response, ensuring that every note from deep bass to crystal-clear treble is reproduced beautifully.

The PCA460 incorporates advanced technologies such as MOSFET transistors, which contribute to its efficient thermal performance. This enables the amplifier to operate at optimal levels without overheating, even during extended use. Furthermore, the overload protection feature safeguards both your amplifier and your audio components from potential damage, making it a reliable choice for long-term use.

A noteworthy characteristic of the Blaupunkt PCA460 is its sleek and compact design. The amplifier’s aluminum chassis not only enhances its aesthetic appeal but also aids in effective heat dissipation. This ensures that the unit remains cool during operation, further enhancing its durability and performance in the demanding environment of a vehicle.

Installation of the PCA460 is made simpler with the inclusion of high-level and low-level inputs, allowing it to connect seamlessly with various car audio systems. The amplifier also features adjustable crossover settings, which grant users the ability to fine-tune their sound setup according to personal preferences. This flexibility makes it suitable for a wide range of speaker configurations, ensuring that users can achieve the best audio performance tailored to their unique tastes.

Additionally, the PCA460 is designed with a user-friendly interface. With easy-access controls for gain and frequency adjustment, tuning the sound to meet individual standards becomes an effortless task.

In summary, the Blaupunkt PCA460 is a powerful, versatile car amplifier that provides a significant upgrade to any car audio system. Its high output, robust build, and advanced technologies combined make it an excellent choice for those looking to elevate their in-car listening experience. Whether for casual listening or serious sound engineering, the PCA460 delivers performance and reliability that audiophiles demand.