CLEANING
1
•Remove the Arm Cover, Trays, Clear Dome and Paint Canisters from Paint Sensation™.
•Rinse or soak each one with warm water and soap.
•Hold the Arm Cover upside down under warm running water.
•Rinse until all parts are clean.
•Allow to dry.
Each Paint Canister has tiny holes that the paint comes out of. If these holes get blocked you can’t paint. The Cleaning Tool unblocks the Paint Holes. To use the Cleaning Tool, insert as shown. Align
Half Moon Curve
| Paint Hole | ||
|
|
|
|
2 |
| 3 |
|
|
|
|
|
Wiggle the Paint Canister until the raised Center Circle on the Paint Canister lid fits snugly into the half circle in the Cleaning Tool base.
Raised Center Circle
Press the button on the Cleaning Tool to clean the hole.
Always release button on the Cleaning Tool before removing Paint Canister from the Cleaning Tool. Repeat to clean the second hole in the Paint Canister.
WARNING: Cleaning Tool contains a functional sharp point.
Press Button
to clean Paint Hole
Cleaning Tool
Half Circle