ASSEMBLYF
Dash
21 | DASH VIEW |
|
• Insert two #8 x 3/4" screws into the sides of the windshield/dash. Tighten the screws.
• Close the doors on the vehicle.
IMPORTANT! Turn the vehicle on its side or over to complete | ||||||
assembly steps |
|
|
|
|
|
|
| A |
|
|
|
| |
|
|
|
| B |
| |
Steering | Metal |
|
| |||
Vehicle | ||||||
Column | Bar Hole | Hole | ||||
22 | BOTTOM VIEW |
|
•Wipe the steering column with a paper towel to remove any excess lubricant.
•First, insert the straight end of the steering column down through the hole in the metal bar A ; then through the hole in the vehicle floor B ; and finally, out through the hole in
the dash.
Steering
Column
Steering
Rod
23 |
•Insert the curved end of the steering column through the hole in the steering rod.
Large Opening
Steering Wheel
Steering Column
24 | DASH VIEW |
|
•Position the steering wheel so that the large opening is UP.
•Fit the steering wheel onto the steering column.
15 | |
|
|