ASSEMBLYF
Wings
Taillight Tabs
35
•Fit the wing tabs into the slots in the top edge near the rear of the vehicle.
Hints:
•There is a left and right wing. They are designed to be assembled one way.
•Make sure the tabs on the top of the taillights fit into the bottom of each wing.
36 |
• Insert two #8 x 3/4" screws into each wing. Tighten the screws.
Truck Bed
37 |
• Position the truck bed over the back end of the vehicle.
38 |
•Insert three #8 x 3/4" screws into the top of the truck bed. Tighten the screws.
19 | |
|
|