Alternative Installation ACAC40000 or ACAC40001

Installing the Vent Panel (ACAC40000) and Vent Panel with Temperature Display (ACAC40001)

1.Install the Vent Panel in an open 2U space using the 10-32 threaded screws provided.

2.Install the temperature sensor in the area to be monitored. (ACAC40001 Only)

Note: To monitor a specific device, position the sensor near the component’s ventilation area for the most accurate reading. The sensor wire is approximately 36 inches long.

3.Provide power to the Temperature Display using the provided fixed 9 volt AC to DC adapter. (ACAC40001 Only)

4.Determine the best route for the sensor and supply cables, and secure the cables using the provided wire ties. (ACAC40001 Only)

Alternative Installation (ACAC40000 or ACAC40001)

1.Install the Vent Panel over the Fan Panel in an open 2U space using the 10- 32 threaded screws provided.

NetShelter AV Rack Cooling Installation