APC ACAC40001 American Power Conversion Legal Disclaimer, NetShelter AV Rack Cooling Installation

Page 2

American Power Conversion Legal Disclaimer

The information presented in this manual is not warranted by the American Power Conversion Corporation to be authoritative, error free, or complete. This publication is not meant to be a substitute for a detailed operational and site specific development plan. Therefore, American Power Conversion Corporation assumes no liability for damages, violations of codes, improper installations, system failures, or any other problems that could arise based on the use of this Publication.

The information contained in this publication is provided as is and has been prepared solely for the purpose of evaluation data center design and construction. This publication has been compiled in good faith by American Power Conversion Corporation. However, no representation is made or warranty given, either express or implied, as to the completeness or accuracy of the information this publication contains.

IN NO EVENT SHALL AMERICAN POWER CONVERSION CORPORATION, OR ANY PARENT, AFFILIATE OR SUBSIDIARY COMPANY OF AMERICAN POWER CONVERSION CORPORATION OR THEIR RESPECTIVE OFFICERS, DIRECTOS, OR EMPLOYEES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL, OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS, CONTRACT REVENUE, DATA, INFORMATION, OR BUSINESS INTERUPTION) RESULTING FROM, ARISING OUT, OR IN CONNECTION WITH THE USE OF, OR INABILITY TO USE THIS PUBLICATION OR THE CONTENT, EVEN IF AMERICAN POWER CONVERSION CORPORATION HAS BEEN EXPRESSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. AMERICAN POWER CONVERSION CORPORATION RESERVES THE RIGHT TO MAKE CHANGES OR UPDATES WITH RESPECT TO OR IN THE CONTECT OF THE PUBLICATION OR THE FORMAT THEREOF AT ANY TIME WITHOUT NOTICE.

Copyright, intellectual, and all other proprietary right in the content (including but not limited to software, audio, video, text, and photographs) rests with American Power Conversion Corporation or its licensors. All rights in the content not expressly granted herein are reserved. No rights of any kind are licensed or assigned to shall otherwise pass to persons accessing this information.

This publication shall not be for resale in whole or in part.

NetShelter AV Rack Cooling Installation

1

Image 2
Contents NetShelter AV Rack Cooling ACF600 ACF601 ACAC40000 ACAC40001Installation American Power Conversion Legal Disclaimer NetShelter AV Rack Cooling InstallationInstalling the Rack Fan Panel ACF600 4.Connect the provided power cord to the fan panel. To ensure polarity protection, align TIP to + Page 3.Turn on the temperature controller by connecting it between the Rack Fan Panel and the supplied power cord as shown below Alternative Installation ACAC40000 or ACAC40001 2.Route the sensor cable and the power cable through the hole in the center of the Fan Panel and secure the cables to the back of the Fan Panel using the provided wire ties