Battery Installation
Hint: We recommend using an alkaline battery for longer battery life.
– | 1,5V | + | |
“D” (LR20) | |||
|
|
1,5V x 2
“AA” (LR6)
B
A
A
1
•Pull to remove the pad from around the retainers and the soothing unit A .
•Remove the pad bottom pocket from the footrest B .
2
3
Toy Bar
•Loosen the screws in the battery compartment door with a Phillips screwdriver.
•Insert two "AA" (LR6) alkaline batteries.
•Replace the battery compartment door and tighten the screws.
•If the toy bar begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline, standard
•Insert batteries as indicated inside the battery compartment.
•Remove batteries during long periods of
•Never
•Use only batteries of the same or equivalent type as recommended.
•Do not charge
•Remove rechargeable batteries from the product before charging.
•If removeable, rechargeable batteries are used, they are only to be charged under adult supervision.
•Loosen the screw in the battery compartment door. Remove the battery compartment door.
•Insert one “D” (LR20) alkaline battery into the battery compartment.
•Replace the battery compartment door and tighten the screw.
•Pull and fit the pad seat bottom pocket around the soothing unit and footrest.
•If this product begins to operate erratically, you may need to reset
the electronics. Slide the power switch off and then back on. | 6 |
|