SIRIUS Messages
SIRIUS Messages
Overview
Messages specific to the
Loss of Signal: | “Acquiring Signal” |
Antenna Error: | “Antenna Error” |
Subscription Updates: | “Subscription Updated” |
Channel Map Updates: | “Updating Channels” |
Invalid Channel: | “Invalid Channel” |
Unsubscribed Channel: | “CALL |
When first powering ON the Controller, and the user selects the SIRIUS source, the
Initializing SIRIUS message is displayed, until the signal is detected.
Channel in Tuning is displayed until the channel is tuned, then the standard SIRIUS metadata is displayed.
When initially powering ON the Controller, the display of metadata on the LCD Keypad may be slower until it is buffered by the SIRIUS module. Since the Controller is always ON, therefore, the SIRIUS module is always on, so this delay is only noticeable when first installing the Matrix Distributed Audio system.
SIRIUS ID Display
The SIRIUS ID can be displayed from two places:
Controller > Setup/SIRIUS/ID
LCD Keypad by keying in channel 0 from the numeric screen (or by tuning to channel 0 using the CH + / - buttons).
Invalid Channels
Invalid Channels will be automatically skipped when navigating channels via
23 | |
|
|