Installing the Doll Booster Using Vehicle Belts
To install the doll booster in a vehicle, you must carefully follow the instructions provided by your vehicle manufacturer in addition to the information in this manual. Before proceeding, be sure you have read and understand all of the instructions in this section.
•Place the booster in a
•Thread the vehicle seat belt through large oval opening on the side of the booster behind the backrest, and then out through the other side.
See Figure 6.
•Buckle the vehicle seat belt, making sure the buckle tongue goes into the correct buckle. The vehicle belt should not be twisted. See Figure 7.
•Secure the booster tightly into position by pushing down on the middle of it with one knee or free hand while tightening the vehicle belt. Refer to your vehicle owner’s manual for instructions to properly tighten the vehicle belt.
Figure 6 | Figure 7 |
WARNINGS
•NEVER use this toy to hold a baby or child in a vehicle. Death or Serious Injury may occur.
•DO NOT use as a booster seat for any dolls or stuffed toys that weigh more than 7 pounds.
•NEVER leave the doll booster unsecured in vehicle. An unsecured doll or doll booster can be thrown around and may injure you or your child in a sharp turn, sudden stop, or crash.
Doll or Stuffed Toy Booster Seat Instruction Manual | Page 5 |