Assembly
9
Power Button
Harness
Steering Wheel
Bottom
Steering Wheel Top
•Turn the steering wheel top over, so that the power button harness faces up.
•Bend the power button harness down (near the power button) toward the center of the steering wheel top.
•Insert the power button harness through the center of the steering wheel bottom, as shown.
•Fit the steering wheel bottom to the steering wheel top and align the four holes in each.
•Insert four screws through the steering wheel bottom and into the steering wheel top. Tighten the screws with a Phillips screwdriver. Do not
10 |
Power Button Harness |
Cowling |
Large Hole |
Vehicle Frame |
•Insert the steering wheel with power button harness down through the large hole in the cowling and the rectangular hole in the vehicle frame.
Hint: Before inserting the power button harness through this hole, locate the rectangular hole in the vehicle frame
by looking through the large hole in the cowling. | 10 |
|
11 
Power Button
Harness
Connector
Motor Harness
Connector
Bottom View
IMPORTANT! There are three electrical connections to be made on this product. All three electrical connections must be made in order for your product to function properly.
Please follow these instructions carefully.
•Carefully turn the vehicle frame over.
•Fit the power button harness connector into the motor harness connector. This is the first electrical connection
Note: If the power button harness connector will not plug into the motor harness connector, turn it over and try again! Do not force the power button harness connector into the motor harness connector.
12 Steering Column |
Curved End |
Large Hole |
Vehicle Frame |
•Turn the vehicle frame upright.
•Fit the steering column (curved end down) through the large hole in the cowling and the small rectangular hole in the vehicle frame.
Hint: Before inserting steering column down through this hole, locate the small rectangular hole in the vehicle frame by looking through the large hole in the cowling.