F
Assembly
WARNING
Children can be harmed by small parts, sharp edges and sharp points in the vehi- cle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
1 |
|
| Front Axle |
Steering Linkage | Washer | ||
|
| ||
|
|
| |
|
|
| Long Bushing |
|
|
| Wheel |
Indented Side | Flat Side |
| |
•Slide a washer onto the steering linkage front axles.
•Slide a long bushing, long end first, onto each front axle.
•Slide a wheel, indented side first, onto each front axle.
2 | Round Bushing | |
Cap Nut | ||
|
Wheel Front Axle
3 | Fork |
Vehicle Frame | |
| |
| Center Axle |
| Steering Linkage |
| Front View |
•While lifting the front of the vehicle frame, fit the steering linkage onto the fork on the front of the vehicle frame. Make sure the center axle is toward the rear of the vehicle.
4 | Front of Vehicle Frame | |
B | ||
| ||
Grooved |
| |
Side | A | |
| ||
Smooth |
| |
Side |
| |
Handle |
| |
Bottom |
| |
| Top View |
•Position the handle bottom so that the smooth side is upright.
•Insert the handle bottom peg into the hole in the side of the vehicle frame, near the front end A .
•Fit a round bushing, barrel end first, onto the end of a front axle. Push the round bushing into the wheel.
•Fit a cap nut onto the end of the front axle.
•Tap the cap nut with a hammer to secure it on the front axle.
•Repeat this procedure to secure the other wheel to the other front axle.
•Turn the handle over so that the grooved side is upright B .
8