Britax 70 manual Rear-Facing Belt Slot Base

Page 17

Child Seat Features

1

21	29
21
22
23
24
25
26	30
27	31
7	32
28	33

17Belly Pad

18Harness Adjuster Lever (under cover)

19Harness Adjuster Strap

20Recline Adjustment Handle

21Shell

22Serial Number & Manufactured Date Label

23Harness Slots

24Forward-Facing Belt Slot

25Forward-Facing Lock-Offs (Red

– under cover on front of shell)

26Rear-Facing Lock-Offs (Blue – under cover on front of shell)

27Rear-Facing Belt Slot

28Base

29Versa-Tether®(Top Anchorage Strap - LATCH component)

30Harness Yoke

31Harness Straps

32Lower Connector Storage

33Versa-Tether®Carry Clip

15

Image 17

Contents MarathonTM Page Table of Contents Secure the top anchorage strap provided with this child seat Section Title Important Notes Registration CertificationRear-Facing 5 40 lbs 2.3 18.1 kg Important Child Seat Usage InformationForward-Facing Harness Height Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Has a latch plate that locks the vehicle belt Lap Belt Tightens by feeding the belt webbing back into the retractor Incompatible Vehicle Seat Belts Vehicle Seating Positions Child Seat Features Rear-Facing Belt Slot Base Loosen the harness Harness Height AdjustmentAdjusting Buckle Position Fastening the Buckle Releasing the Buckle Using the Chest ClipInfant Body Pillow Using the Lock-OffsTo Open To Close Rear-Facing Recline PositionsAcceptable overhangUnacceptable overhang Forward-FacingUsing Lower Anchors and Tethers for Children Latch Top Using the Versa-Tether Rear-Facing Tether Connector Strap To remove the Versa-Tether from the carry clip Shows a tether acceptable for use Latch Installation Before You Begin Install with Latch as shown above Rear-Facing Installation Checklist Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Loosen the harness Checklist Lap Belt Installation Before You Begin Install with lap belt as shown above Replace the cover and belly pad Checklist Check that your vehicle has lower anchors Install with Latch as shown above Forward-Facing Installation Check Versa-TetherTop Tether attachment Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Open the locking tab Open the clamp Store excess webbing in the elastic strap Replace the cover Lap Belt Installation Before You Begin Install with lap belt as shown above Loosen the harness Checklist Forward-Facing Installation Rear-Facing InstallationSecuring Your Child Position the harness straps around the child Fasten the harness buckle Loosen the harness Care and Maintenance Care and Maintenance Cleaning the Shell Cleaning the CoverCleaning the Harness Cover Replacement Care and Maintenance Remove the Buckle Cleaning the BuckleTo Clean Re-thread the Buckle Problem The harness cannot be adjusted to its full height TroubleshootingLimited ONE-YEAR Warranty Page Britax Child Safety, Inc

Related manuals

Manual 70 pages 53.98 Kb