Britax 55 manual Replace the cover and belly pad

Page 42

Rear-Facing Installation

1Loosen the harness.

a Lift harness adjuster lever

b Pull both harness straps forward

2Remove the body pillow, unbuckle the harness, and remove the belly pad.

3Lift the back cover, then pull it forward while pulling the buckle through to access the rear-facing belt path.

4Route the vehicle seat belt through the rear-facing belt slots, then buckle. Ensure the vehicle belt is not twisted.

5Push the child seat down while pulling the vehicle belt to remove all slack (see pages 10 11).

6Rear-facing installations can be improved by the use of the Versa- Tether (see pages 26 29).

7Pull the buckle up through its appropriate slot in the cover.

8Replace the cover and belly pad.

40

1b

1a

4

5

Image 42
Contents Roundabout Page Table of Contents Secure the top anchorage strap provided with this child seat Section Title Important Notes Certification RegistrationImportant Child Seat Usage Information Rear-Facing 5 40 lbs 2.3 18.1 kgForward-Facing Harness Height Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Has a latch plate that locks the vehicle belt Lap Belt Tightens by feeding the belt webbing back into the retractor Incompatible Vehicle Seat Belts Vehicle Seating Positions Child Seat Features Rear-Facing Belt Slot Base Harness Height Adjustment Adjuster Strap Adjusting Buckle Position To adjust the buckle Using the Chest Clip Fastening the Buckle Releasing the BuckleUsing the Lock-Offs To Open To CloseInfant Body Pillow Recline Positions PositionRear-Facing Forward-FacingUsing Lower Anchors and Tethers for Children Latch Top Using the Versa-Tether Rear-Facing Tether Connector Strap To remove the Versa-Tether from the carry clip Shows a tether acceptable for use Latch Installation Before You Begin Install with Latch as shown above Rear-Facing Installation Checklist Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Loosen the harness Check buckle connection Lap Belt Installation Before You Begin Install with lap belt as shown above Replace the cover and belly pad Checklist Check that your vehicle has lower anchors Install with Latch as shown above Forward-Facing Installation Check Versa-TetherTop Tether attachment Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Open the locking tab Open the clamp Side to side at the belt path Lap Belt Installation Before You Begin Install with lap belt as shown above Loosen the harness Checklist Rear-Facing Installation Forward-Facing InstallationSecuring Your Child Open the chest clip Fasten the chest clip Care and Maintenance Care and Maintenance Cleaning the Cover Cleaning the HarnessCleaning the Shell Cover Replacement Adjuster Strap Cleaning the Buckle To CleanRemove the Buckle Re-thread the Buckle Troubleshooting Problem The harness is hard to adjustLimited ONE-YEAR Warranty Page Britax Child Safety, Inc