Britax 55 manual Check Versa-TetherTop Tether attachment

Page 47

Forward-Facing Installation

Check Versa-Tether®(Top Tether) attachment

Check that no more than 20% or 3 inches (7.6 cm) of the base hangs over the edge of the vehicle seat

Check that Versa-Tether®(Top Tether) webbing is stored in the elastic strap

Check that there is

 

LESS than 1 in. (2.5 cm)

Check lower

of movement (front to back

connector attachments

or side to side) at the belt path

 

Checklist

9Check that all connections are secure.

9Check that the lower connector straps are not twisted.

9Check that no more than 20% or 3 inches (7.6 cm) of the base hangs over the edge of the vehicle seat.

9Check that the child seat cannot be moved front to back or side to side more than 1 in. (2.5 cm) at the belt path. If the child seat is not secure, repeat installation or use a different seating location.

9Check that any excess Versa-Tether®webbing is contained within your vehicle and secured in the elastic strap.

45

Image 47 Contents
Roundabout Page Table of Contents Secure the top anchorage strap provided with this child seat Section Title Important Notes Registration CertificationRear-Facing 5 40 lbs 2.3 18.1 kg Important Child Seat Usage InformationForward-Facing Harness Height Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Has a latch plate that locks the vehicle belt Lap Belt Tightens by feeding the belt webbing back into the retractor Incompatible Vehicle Seat Belts Vehicle Seating Positions Child Seat Features Rear-Facing Belt Slot Base Harness Height Adjustment Adjuster Strap Adjusting Buckle Position To adjust the buckle Fastening the Buckle Releasing the Buckle Using the Chest ClipInfant Body Pillow Using the Lock-OffsTo Open To Close Position Recline PositionsForward-Facing Rear-FacingUsing Lower Anchors and Tethers for Children Latch Top Using the Versa-Tether Rear-Facing Tether Connector Strap To remove the Versa-Tether from the carry clip Shows a tether acceptable for use Latch Installation Before You Begin Install with Latch as shown above Rear-Facing Installation Checklist Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Loosen the harness Check buckle connection Lap Belt Installation Before You Begin Install with lap belt as shown above Replace the cover and belly pad Checklist Check that your vehicle has lower anchors Install with Latch as shown above Forward-Facing Installation Check Versa-TetherTop Tether attachment Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Open the locking tab Open the clamp Side to side at the belt path Lap Belt Installation Before You Begin Install with lap belt as shown above Loosen the harness Checklist Forward-Facing Installation Rear-Facing InstallationSecuring Your Child Open the chest clip Fasten the chest clip Care and Maintenance Care and Maintenance Cleaning the Shell Cleaning the CoverCleaning the Harness Cover Replacement Adjuster Strap Remove the Buckle Cleaning the BuckleTo Clean Re-thread the Buckle Problem The harness is hard to adjust TroubleshootingLimited ONE-YEAR Warranty Page Britax Child Safety, Inc