Britax 55 manual Re-thread the Buckle

Page 66
ADJUSTMENT SLOT

Care and Maintenance

Re-thread the Buckle

IMPORTANT:

• ALWAYS position the buckle in the inner slot for rear-facing use.

• The vehicle belt must pass in front of the buckle strap for rear-facing use.

• NEVER leave the buckle in the adjustment slot.

Use the outer buckle slot when installing the child seat forward- facing with a child weighing 30 lbs (13.6 kg) and above or if the buckle is under the child in the inner position.

1Guide the buckle retainer down through the slot in the child seat shell.

3Select the appropriate slot for the size of your child and turn the buckle webbing and slide it into the chosen slot.

4Ensure that the buckle strap is not twisted and that the button faces out.

2Slide the buckle webbing into the slot between buckle positions.

64

Image 66 Contents
Roundabout Page Table of Contents Secure the top anchorage strap provided with this child seat Section Title Important Notes Certification RegistrationImportant Child Seat Usage Information Rear-Facing 5 40 lbs 2.3 18.1 kgForward-Facing Harness Height Compatible Vehicle Seat Belts Lap-Shoulder 3-Point Belt Has a latch plate that locks the vehicle belt Lap Belt Tightens by feeding the belt webbing back into the retractor Incompatible Vehicle Seat Belts Vehicle Seating Positions Child Seat Features Rear-Facing Belt Slot Base Harness Height Adjustment Adjuster Strap Adjusting Buckle Position To adjust the buckle Using the Chest Clip Fastening the Buckle Releasing the BuckleUsing the Lock-Offs To Open To CloseInfant Body Pillow Recline Positions PositionRear-Facing Forward-FacingUsing Lower Anchors and Tethers for Children Latch Top Using the Versa-Tether Rear-Facing Tether Connector Strap To remove the Versa-Tether from the carry clip Shows a tether acceptable for use Latch Installation Before You Begin Install with Latch as shown above Rear-Facing Installation Checklist Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Loosen the harness Check buckle connection Lap Belt Installation Before You Begin Install with lap belt as shown above Replace the cover and belly pad Checklist Check that your vehicle has lower anchors Install with Latch as shown above Forward-Facing Installation Check Versa-TetherTop Tether attachment Lap-Shoulder Belt Installation Before You Begin Install with lap-shoulder belt as shown above Open the locking tab Open the clamp Side to side at the belt path Lap Belt Installation Before You Begin Install with lap belt as shown above Loosen the harness Checklist Rear-Facing Installation Forward-Facing InstallationSecuring Your Child Open the chest clip Fasten the chest clip Care and Maintenance Care and Maintenance Cleaning the Cover Cleaning the HarnessCleaning the Shell Cover Replacement Adjuster Strap Cleaning the Buckle To CleanRemove the Buckle Re-thread the Buckle Troubleshooting Problem The harness is hard to adjustLimited ONE-YEAR Warranty Page Britax Child Safety, Inc