Fujitsu FPCCR05 Mounting the Cradle on a Wall, Removing the Tablet PC from the Charge-Only Cradle

Page 5

DC-In Port

Figure 4. DC-In Port on Cradle

Removing the Tablet PC from the Charge-Only Cradle

While holding the base of the cradle with one hand, gently pull the Tablet PC out of the cradle.

Mounting the Cradle on a Wall

The charge-only cradle is designed so that it can be easily mounted to a wall. The cradle consists of two large compo- nents: a base and a cradle. Before mounting the cradle to a wall, the base component must be removed.

To separate the two components, perform the following steps:

1.Holding the cradle portion with one hand and the base portion with the other, lift the cradle section while pushing down on the base section until the two halves disengage at the separation point (Figure 5).

5

Image 5
Contents Charge-Only Cradle User’s Guide Attaching the DC Adapter Installing the System in the CradleInside the Charge-Only Cradle Verifying Battery SizeInstalling the Tablet PC in the Cradle Installing the Tablet PC in the Charge-Only CradleRemoving the Tablet PC from the Charge-Only Cradle Mounting the Cradle on a WallSeparating the Cradle Wall-mount Screw Dimensions Fujitsu Computer Systems Corporation