Fujitsu FPCCR05 manual Installing the Tablet PC in the Charge-Only Cradle

Page 4

Installing the Tablet PC in the Charge-Only Cradle

1.Place the cradle on the flat, stable location in which it will be used.

2.After verifying that the spacer is configured correctly and the DC adapter is attached to the DC-in port, hold the system in landscape mode, with the buttons arranged across the top (Figure 3).

Figure 3. Installing the Tablet PC in the Cradle

3.Insert the tablet into the cradle until it rests securely on the bottom of the cradle.

4.Plug the system AC adapter into the DC-in port on the right side of the cradle, and the other end into a power outlet.

Image 4

Contents Charge-Only Cradle User’s Guide Installing the System in the Cradle Attaching the DC AdapterVerifying Battery Size Inside the Charge-Only CradleInstalling the Tablet PC in the Charge-Only Cradle Installing the Tablet PC in the CradleMounting the Cradle on a Wall Removing the Tablet PC from the Charge-Only CradleSeparating the Cradle Wall-mount Screw Dimensions Fujitsu Computer Systems Corporation