Installing the System in the Cradle

To install the Tablet PC in the charge-only cradle, you must first attach a DC adapter to the system’s DC port.

Attaching the DC Adapter

1.Hold your system so that the left side (when viewed in portrait mode) with the DC-in port is facing you (Figure 1).

Lock Slot

DC-In Port

DC Adapter

Figure 1. Attaching the DC Adapter

2.Attach the DC adapter to the system by inserting the plugs inside of the adapter into the lock slot and the DC-in port on the system (Figure 1). The adapter should fit snugly into position.

When powering your charge-only cradle, use only the AC Adapter that is compatible with your Tablet PC.