How to Properly
Use the Urban
Advantage Stroller
6.TO ADJUST THE KICKSTAND
!WARNING: IF THE CABLE IS NOT ADJUSTED PROPERLY OR THE KICKSTAND IS BENT OR BROKEN THE STABILITY OF THE STROLLER IN THE PARKED POSITION IS DIMINISHED. IN ALL EVENTS, NO CHILD SHOULD EVER BE LEFT UNATTENDED IN ANY STROLLER.
Turning the nut connected to the brake cable clockwise reduces the amount of force required to extend the kickstand. Turning the nut
The legs of the kickstand must be vertical when the unit is parked in order to be effective. Adjust the nut to keep legs in vertical position with the least amount of force required. The cable will require re- adjusting over time as parts wear.
There should approximately 1/2" to 1" clearance between the bottom of the kickstand and the ground. This allows for lower air pressure in tires and/or heavier children.
6. OPTIONS FOR USING THE CHILD TRAY
NOTE: Some parents may prefer not to install the child tray on the stroller as this option may allow easier accessibility to the child. (figure B & C)
Ex: Diaper changing or feeding. The child tray may be easily attached and removed by pulling off or snapping on each side to the frame of the stroller (just below the center lock on the frame and above the foot rest)
7. OPTIONS FOR USING THE SWIVEL WHEEL LOCK
TO LOCK FRONT SWIVEL: Adjust front wheel so that wheel is straight and lock is forward. Push lock to right. (figure D)
TO UNLOCK FRONT SWIVEL: Push lock to left.
NOTE: On rough surfaces, lock the wheel to keep straight. On smooth surfaces, unlock to allow the wheel to swivel.
Figure A
Figure B
Figure C
Figure D
10 | HOW TO PROPERLY USE THE URBAN ADVANTAGE |
|
|