6.Hold seat and pull front to back and left to right at belt path to check for secure installation (f). The child restraint should not move side to side or forward more than 1 inch (2.5 cm). Check that the lower anchor belt stays tight and does not slip from the tightened position. If it does not stay tight, try
another seating position or contact Customer Service. | f |
7. Check level indicator on child restraint (g).
Vehicle must be on level ground and child in child restraint when checking level indicator. Ball MUST be entirely in blue zone (g). If necessary, place rolled towels under child restraint, at vehicle seat crease, until entire ball is in blue zone. Then
•DO NOT use tether
•Periodically check that child restraint is securely installed and properly leveled; adjust if necessary.
•To remove LATCH, see “Removing LATCH from Vehicle Anchor Points”, p. 38.
g
LATCH
21