Adcom GFR-700 Control Connections, Remote IR Sensor Connections, Screen/Power Trigger Connections

Page 29

Control Connections

Sensors, triggers, and PCs, oh my. If you’ve gotten this far, you’re really fine-tuning your home theater. This section is all about control:

Remote IR sensors - These allow you to control your GFR-700 even if it is behind closed doors or otherwise concealed from view.

Triggers - These allow you to automatically power on connected devices, such as motorized movie screens and connected amplifiers, when the GFR-700 is powered on or a particular input is selected.

RS232 Port - This allows you to control the GFR- 700 with a home automation system or to up- grade the receiver’s firmware through the RS232 port on your PC.

Remote IR Sensor Connections

1Obtain a remote IR sensor.

Choose a remote IR sensor from an electron- ics distributor that suits your particular in- stallation needs.

Install the remote IR sensor according to the manufacturer’s instructions.

3Connect the remote IR sensor’s mono mini-plug to the Main IR input on the GFR-700.

4Confirm the remote IR sensor is working.

Conceal the GFR-700 front panel and at- tempt to control the receiver by pointing the remote at the remote IR sensor.

Screen/Power Trigger Connections

1Using a cable with dual mono mini-plugs, con- nect the Main 12V DC trigger jack to the 12V DC trigger on your compatible device.

Common compatible devices include ampli- fiers, motorized screens, and high-end au- dio/video components.

2Make sure the Main Trigger is enabled in the menu system; see page 33.

• The default setting is on for all inputs.

3Confirm the trigger is working.

Power on the GFR-700 or select the input for which the main trigger is enabled.

The connected device should power on.

PC Connections

1Contact Adcom for information on the avail-

ability of firmware updates and instructions for implementing them.

2When instructed, use an RS232 cable to connect the RS232 port on the GFR-700 to the RS232 port on your PC.

Media Center & Home Automation Control Systems

1The RS232 port can also be used to control the GFR-700 from a media control center, home au- tomation system, or PC.

See Discrete Remote Control Commands on pages 49-50 for more information.

Chatper 2 - Connections

 

 

RS232

Main IR

Main 12V

 

 

 

 

Control

Input

DC Trigger

 

 

 

��

 

 

 

 

 

 

 

��

��

 

 

 

 

 

 

 

 

��

 

 

 

 

 

 

 

 

��

��

��

��

 

��

 

 

 

 

 

 

 

 

 

��

 

 

 

 

 

 

 

��

��

 

 

 

 

 

 

 

 

���

 

 

 

 

 

 

 

 

 

�������

��

 

 

 

 

 

 

 

 

 

��������������������������

 

 

 

 

 

���

 

 

 

 

 

 

 

 

 

 

 

������ ����

 

��������������������

 

 

 

���

 

 

������

������

������

������

 

 

 

��������������

 

 

 

 

 

 

 

��

 

 

�������� �������� �������

��������� ���������

��������� ���������

���������

���������

 

 

 

 

 

��

 

 

�������������

 

 

 

 

 

 

 

 

 

 

 

 

 

��

�������

��

 

 

 

�����

�����

 

 

 

 

 

 

 

 

 

 

 

��������������

 

 

 

 

��

 

 

 

 

 

�������������������������

�����

 

 

 

 

 

 

�����������

 

 

 

 

 

 

 

����

�������

�������������

 

 

 

���������������������������

Notes:

To configure the Main 12V DC trigger, see page 33.

For a list of Discrete Remote Control Commands, see pages 49-50.

The 12V trigger is simply a “trigger” and not a relay driv- er. Some motorized screens will require an outboard de- vice to be used in association with the 12V trigger. See the screen manufacturer’s instruc- tions or ask your dealer or distributor.

www.adcom.com

GFR-700 Owner’s Manual

29

Image 29
Contents GFR-700A/V Receiver Copyrights/Trademarks Congratulations on your purchase of the Adcom GFR-700Table of Contents Regulatory Information Important Safety InstructionsUnpacking the GFR-700 Key FeaturesIntroduction Inserting the Remote Batteries About the Remote ControlPlacing the GFR-700 Front Panel Overview Remote Control Overview Setup button Volume  / buttonsMode button Preset/Tune buttonRear Panel Overview Main power switch Voltage switchZone 2 IR input 11 RS232 controlVolume level Surround modeDisplay Overview Video sourceBefore You Begin Connections OverviewConnecting the FM Antenna Connecting the AM Loop AntennaAM/FM Antenna Connections Antenna InputBasic Audio/Video Connections Connecting Audio/Video ComponentsFor Advanced Connections Video InputComponent/Progressive Scan Connections DVD Player ConnectionsDigital Audio Connections Hdmi ConnectionsChatper 2 Connections Coaxial Optical Digital Audio Connecting Digital Audio ComponentsDigital Audio Connections Hdmi Connections Using the Hdmi JacksConnecting Hdmi Components External Decoder Connections Connecting a DVD-A/SACD PlayerTape Input Connecting a CD PlayerConnecting a Tape Player Composite Video Connections TV/Monitor ConnectionsVideo Connections Component Video ConnectionsPlacing your Speakers Speaker PlacementSpeaker Connections Connecting SpeakersRight Left Surround Front CenterConnecting Surround Back Speakers Connecting an AmplifierConnecting a Subwoofer Surround Back Right Back Left Subwoofer OutputOutput Video 3 Video Connecting a Video RecorderTape Aux Output Connecting a Tape RecorderTape Out/Aux Connections Connecting the 12V DC Trigger Connecting the Zone 2 OutputsConnecting a Remote Sensor Variable or Fixed Output?Control Connections Screen/Power Trigger ConnectionsRemote IR Sensor Connections PC ConnectionsChecking the Voltage Switch Power ConnectionsConnecting the Power Cable Turning on the PowerSetup Overview Setup Navigation Input Configuration Speaker Configuration Delay Unit Delay ConfigurationTest Tone Channel BalanceFront / R Front Surround / R SurroundPlii Music Config Dimension Plii Music Config Center WidthNEO6 Music Config Center Image Pro Logic IIx/Neo6 ConfigurationRoom 2 Basic Configuration Advanced SettingsRoom MuteRoom 2 Advanced Configuration System Configuration Setup LockOSD Time OUT VID BLK LVLVideo 1~4 Analog Input LevelTape TunerProgramming Remote Commands Remote Control SetupUsing Preprogrammed Commands Main Commands Video 1-3 Commands Using Preprogrammed CommandsVideo 4 GDV-850 Commands CD GCD-750 Commands Tuner Commands Room 2 Commands Programming a Command Programming Remote CommandsDeleting a Command Deleting Remote CommandsDeleting all Commands for a Component Deleting all Commands for all ComponentsDeleting a Macro button Programming Macro ButtonsProgramming a Macro Button Ascii Discrete Remote Control CommandsFunction Description Operations Overview Basic Audio/Video Playback Special Playback FeaturesExternal 7.1 Playback Tape PlaybackDTS Surround Modes Selecting Surround ModesDolby Surround Modes Hall Other Surround ModesStereo Making an Audio/Video Recording Basic RecordingTuner Operations System Operations Using the Sleep TimerUsing the Front Panel Display Dimmer Activating the Room 2 Output Overriding Default Room 2 SettingsRoom 2 Operations System Reset Product Care & MaintenanceCustomer Support Adcom Protection PlanSymptom Possible Reason Possible Solution TroubleshootingTechnical Specifications Index Page East Anderson Drive, Suite Scottsdale, Arizona Voice Fax

GFR-700 specifications

The Adcom GFR-700 is a high-performance A/V receiver that epitomizes cutting-edge technology and excellent audio capabilities for home theater enthusiasts. Designed with both versatility and user-friendliness in mind, this receiver integrates advanced features that make it a formidable choice for any modern audio setup.

One of the standout characteristics of the GFR-700 is its powerful amplification. It is equipped with a robust power supply and delivers an impressive output power, ensuring that your audio is not only loud but also clear and dynamic. Each channel is meticulously engineered to handle demanding audio frequencies, producing a soundstage that can envelop any room.

The GFR-700 is compatible with a wide variety of audio formats, including the latest surround sound technologies. It supports Dolby Atmos and DTS:X, allowing users to experience immersive 3D sound. This capability is further enhanced by advanced digital signal processing that optimally maps audio to the listening environment. The receiver also features 4K Ultra HD pass-through, HDR support, and a host of HDMI inputs, making it an ideal companion for high-definition video sources.

Connectivity is another stronghold of the GFR-700. With Wi-Fi, Bluetooth, and Ethernet capabilities, users can easily stream music from various services or their personal library. The receiver also supports multi-room audio, enabling playback in different areas of the home for a cohesive audio experience.

User-friendliness is enhanced by the intuitive interface and remote control system that simplifies navigation. The inclusion of a mobile app allows users to control the receiver from their smartphones, making adjustments a breeze, whether they're in the room or across the house.

The build quality of the GFR-700 is also noteworthy. The receiver's design incorporates heat dissipation features that maintain optimal operating temperatures, enhancing longevity. Its sleek appearance ensures it blends seamlessly with any entertainment setup.

In summary, the Adcom GFR-700 stands out in the crowded market of A/V receivers due to its powerful amplification, advanced surround sound technologies, versatile connectivity options, and user-friendly design. It is an ideal choice for audiophiles and casual listeners alike who seek to elevate their home audio experience.