Adcom GFR-700 user manual Front Panel Overview

Page 7

Front Panel Overview

The following is an overview of the GFR-700 front panel.

1

Standby button

7

Ext 7.1 button

 

Powers the GFR-700 on and off (Standby mode).

 

Selects the Ext 7.1 inputs, usually connected to

 

• The rear panel power switch must be on

 

a DVD, DVD-Audio, or SACD player.

 

for this button to function.

8

Surr Mode button

 

• The Power LED glows amber in Standby

 

mode and red in On mode.

 

Steps through all available surround modes

2

Room Two On/Off button

 

(e.g., Dolby Digital, DTS, etc.) for the selected

 

input.

 

Activates the GFR-700’s Zone 2 outputs, usu-

 

• Your selection will override the default

 

ally connected to an amplifier/receiver in a

 

surround mode for the input.

 

second room.

9

FM/AM button

3

Room Two Setup button

 

Selects Tuner mode. Press repeatedly to switch

 

Displays the Zone 2 configuration menu.

 

between the FM and AM tuner bands.

•Press repeatedly to step through the Room

 

2 menu options and use the Volume knob

10

Tune/Preset button

 

 

to make selections.

 

In Tuner mode, switches between manual and

 

4

Video 1~4 buttons

 

preset tuning.

 

11

Front panel display

 

 

Selects the Video 1~4 inputs.

 

 

• Selecting an input activates its audio, vid-

 

Displays GFR-700 menus and status information

 

 

eo, and configuration settings.

 

(see page 12).

 

5

Tape button

12

Up/Down buttons

 

 

Monitors the Tape output, usually connected to

 

In Tuner mode, selects stored presets or manu-

 

 

a recording device (e.g., a VCR or tape deck).

 

ally scans the selected tuner band.

 

6

CD button

13

Volume knob

 

 

Selects the CD input, usually connected to a

 

Adjusts the volume level for the selected input.

 

 

CD player.

 

 

 

www.adcom.com

 

GFR-700 Owner’s Manual

7

Chapter 1 - Welcome

Page 6 Page 8
Image 7
Page 6 Page 8
Contents GFR-700A/V Receiver Copyrights/Trademarks Congratulations on your purchase of the Adcom GFR-700Table of Contents Regulatory Information Important Safety InstructionsIntroduction Key FeaturesUnpacking the GFR-700 Placing the GFR-700 About the Remote ControlInserting the Remote Batteries Front Panel Overview Remote Control Overview Preset/Tune button Volume  / buttonsSetup button Mode buttonRear Panel Overview 11 RS232 control Voltage switchMain power switch Zone 2 IR inputVideo source Surround modeVolume level Display OverviewBefore You Begin Connections OverviewAntenna Input Connecting the AM Loop AntennaConnecting the FM Antenna AM/FM Antenna ConnectionsVideo Input Connecting Audio/Video ComponentsBasic Audio/Video Connections For Advanced ConnectionsHdmi Connections DVD Player ConnectionsComponent/Progressive Scan Connections Digital Audio ConnectionsChatper 2 Connections Digital Audio Connections Connecting Digital Audio ComponentsCoaxial Optical Digital Audio Connecting Hdmi Components Using the Hdmi JacksHdmi Connections External Decoder Connections Connecting a DVD-A/SACD PlayerConnecting a Tape Player Connecting a CD PlayerTape Input Component Video Connections TV/Monitor ConnectionsComposite Video Connections Video ConnectionsPlacing your Speakers Speaker PlacementLeft Surround Front Center Connecting SpeakersSpeaker Connections RightSurround Back Right Back Left Subwoofer Output Connecting an AmplifierConnecting Surround Back Speakers Connecting a SubwooferOutput Video 3 Video Connecting a Video RecorderTape Out/Aux Connections Connecting a Tape RecorderTape Aux Output Variable or Fixed Output? Connecting the Zone 2 OutputsConnecting the 12V DC Trigger Connecting a Remote SensorPC Connections Screen/Power Trigger ConnectionsControl Connections Remote IR Sensor ConnectionsTurning on the Power Power ConnectionsChecking the Voltage Switch Connecting the Power CableSetup Overview Setup Navigation Input Configuration Speaker Configuration Delay Unit Delay ConfigurationSurround / R Surround Channel BalanceTest Tone Front / R FrontPro Logic IIx/Neo6 Configuration Plii Music Config Center WidthPlii Music Config Dimension NEO6 Music Config Center ImageMute Advanced SettingsRoom 2 Basic Configuration RoomRoom 2 Advanced Configuration VID BLK LVL Setup LockSystem Configuration OSD Time OUTTuner Analog Input LevelVideo 1~4 TapeUsing Preprogrammed Commands Remote Control SetupProgramming Remote Commands Main Commands Video 1-3 Commands Using Preprogrammed CommandsVideo 4 GDV-850 Commands CD GCD-750 Commands Tuner Commands Room 2 Commands Programming a Command Programming Remote CommandsDeleting all Commands for all Components Deleting Remote CommandsDeleting a Command Deleting all Commands for a ComponentProgramming a Macro Button Programming Macro ButtonsDeleting a Macro button Ascii Discrete Remote Control CommandsFunction Description Operations Overview Tape Playback Special Playback FeaturesBasic Audio/Video Playback External 7.1 PlaybackDolby Surround Modes Selecting Surround ModesDTS Surround Modes Stereo Other Surround ModesHall Making an Audio/Video Recording Basic RecordingTuner Operations Using the Front Panel Display Dimmer Using the Sleep TimerSystem Operations Room 2 Operations Overriding Default Room 2 SettingsActivating the Room 2 Output Adcom Protection Plan Product Care & MaintenanceSystem Reset Customer SupportSymptom Possible Reason Possible Solution TroubleshootingTechnical Specifications Index Page East Anderson Drive, Suite Scottsdale, Arizona Voice Fax

GFR-700 specifications

The Adcom GFR-700 is a high-performance A/V receiver that epitomizes cutting-edge technology and excellent audio capabilities for home theater enthusiasts. Designed with both versatility and user-friendliness in mind, this receiver integrates advanced features that make it a formidable choice for any modern audio setup.

One of the standout characteristics of the GFR-700 is its powerful amplification. It is equipped with a robust power supply and delivers an impressive output power, ensuring that your audio is not only loud but also clear and dynamic. Each channel is meticulously engineered to handle demanding audio frequencies, producing a soundstage that can envelop any room.

The GFR-700 is compatible with a wide variety of audio formats, including the latest surround sound technologies. It supports Dolby Atmos and DTS:X, allowing users to experience immersive 3D sound. This capability is further enhanced by advanced digital signal processing that optimally maps audio to the listening environment. The receiver also features 4K Ultra HD pass-through, HDR support, and a host of HDMI inputs, making it an ideal companion for high-definition video sources.

Connectivity is another stronghold of the GFR-700. With Wi-Fi, Bluetooth, and Ethernet capabilities, users can easily stream music from various services or their personal library. The receiver also supports multi-room audio, enabling playback in different areas of the home for a cohesive audio experience.

User-friendliness is enhanced by the intuitive interface and remote control system that simplifies navigation. The inclusion of a mobile app allows users to control the receiver from their smartphones, making adjustments a breeze, whether they're in the room or across the house.

The build quality of the GFR-700 is also noteworthy. The receiver's design incorporates heat dissipation features that maintain optimal operating temperatures, enhancing longevity. Its sleek appearance ensures it blends seamlessly with any entertainment setup.

In summary, the Adcom GFR-700 stands out in the crowded market of A/V receivers due to its powerful amplification, advanced surround sound technologies, versatile connectivity options, and user-friendly design. It is an ideal choice for audiophiles and casual listeners alike who seek to elevate their home audio experience.
Top Page Image Contents