Arcam AVR280 Before you start, Introduction, Using this handbook, What’s in the box?, Safety

Page 4

Before you start!

Introduction

The AVR280 is a high quality and high performance home cinema processor and multi-channel audio amplifier built to Arcam’s traditional high quality design and manufacturing standards. It combines high resolution digital processing with high performance audio and video components to bring you an unrivalled home entertainment centre.

In addition to the built-in tuner, the AVR280 allows switching and volume control of seven analogue and six digital sources, making it an ideal companion for both home cinema and two-channel stereo systems. Since many of these source components are also capable of outputting high quality video signals,

the AVR280 includes broadcast quality video switching for composite, S-video, component, RGB- and HDMI-video signals. There are inputs and outputs for both tape and VCR, as well as a digital output. DVD-Audio or SACD can be connected via the multi-channel input. Control of the AVR280 is either by front panel control buttons, IR remote control or an RS232 port (which also can be used to upload future software enhancements).

As well as providing the audio and video being used in the main listening area, the AVR280 allows the same, or a different, source to be routed to a second area (called ‘Zone 2’), such as the kitchen, bedroom, lounge, etc. Zone 2 can have full remote control over the source selection and volume in that area.

The customised installation of the AVR280 in a listening room is an important process which requires care at every stage. For this reason, the installation information is very comprehensive and should be followed carefully.

Using this handbook

Thank you for purchasing the Arcam AVR280 Surround Sound Receiver.

This handbook has been designed to give you all the information you need to install, connect, set up and use the Arcam AVR280 Surround Sound Receiver. The remote control handset supplied with the equipment is also described.

It may be that the AVR280 has been installed and set up as part of your Hi-Fi installation by a qualified Arcam dealer. In this case, you may wish to skip the sections of this handbook dealing with installation and setting up the unit and move directly to the section detailing the operation of your unit.

Safety

Safety guidelines are set out on page 2 of this handbook.

Many of these items are common sense precautions but, for your own safety, and to ensure that you do not damage the unit, we recommend that you read them.

This is a class 1 product and requires an earth connection.

What’s in the box?

Please confirm that the following items are in the box when you receive it:

<Arcam AVR280 surround-sound receiver – the model number is shown on the right of the front panel of the player;

<Arcam CR100 remote control with 4 ‘AAA’ batteries – the remote control model number is shown on the front at the bottom of the remote control;

<

<

<

FM ribbon and AM loop antennae;

Mains power lead appropriate for the mains supply in your area; Product registration card and envelope.

If any of these items are missing or incorrect, please contact your Arcam dealer immediately.

AVR280

Image 4
Contents AVR280 Important safety instructions Safety guidelinesSafety compliance Contents Using this handbook SafetyBefore you start IntroductionBefore making connections Installation Positioning the unitAVR280 rear panel CablesAudio connections Analogue audio connectionsDigital audio connections Analogue pre-amplifier outputVideo connections Connecting loudspeakers Using spade terminalsConnecting the AM and FM antennas Zone 2 connectionsFM antenna AM antennaConnecting to a power supply Control connectionsTrigger outputs Mains leadConfiguring the AVR280 Set-up modeSet-up Menu Index Navigating the Set-up menuGeneral Settings ‘Basic’ Set-up MenusSpeaker Sizes Subwoofer SettingsBypass the DSP processing Speaker delay settings Speaker Delay SettingsDistance measurements for 5.1 Level settings EX SettingsTest Tone Cycle Use Channels 6+7 forADV 2 Video Settings ADV 3 Digital Settings‘Advanced’ Set-up Menus ADV 1 Speaker EqSaving Settings and Exit Set-up ADV 4 Zone 2 SettingsADV 5 Analogue Settings ADV 6 Hdmi SettingsCR100 Universal remote control AVR specific keys CR100 Switching on/off Volume controlOperating your AVR280 Front panel displayHeadphones Input selectionStereo Direct ZoneRemote control buttons Effects/FXMode Treble/BassUsing the tuner Tuning to a stationStoring a preset Deleting a presetUsing the Main Menu Using Zone ‘Dimension’ is set to 3 for normal useDisplay Centre spreading Effect No centre spreading 20.8 69.8 Phantom centreSurround modes Digital multi-channel sourcesMulti-channel source modes Two-channel source modesFollowing decoding and surround modes are available Mono Speaker positioning DSP Effects ModesBi-wiring and bi-amping loudspeakers Bi-wiring your loudspeakersBefore you start important information Bi-amping your systemTroubleshooting Source switching changes randomly or freezes on one source No Zone 2 audio when playing DTS filmUnable to adjust bass and treble controls Hum on an analogue inputScart RGB cable with audio back to processor Scart connectionsScart S-video cable with audio back to processor Command Command code IR Remote CodesSystem code Command Command code Continual improvement policy Technical specificationsRadio interference Worldwide Guarantee GuaranteeOn line registration Issue

AVR280 specifications

The Arcam AVR280 is a high-performance AV receiver designed to deliver an immersive home theater experience. Known for its robust build quality and advanced technological features, it caters to both audiophiles and casual users seeking top-notch sound and video quality.

One of the standout features of the AVR280 is its power output. The receiver is equipped with an impressive 7-channel amplification system, providing 80 watts per channel into 8 ohms. This ample power ensures clear and dynamic audio reproduction, making it ideal for driving demanding speaker systems and creating a rich soundstage. The AVR280 also supports Dolby TrueHD and DTS-HD Master Audio, ensuring superior sound quality for high-definition movie formats.

In terms of connectivity, the AVR280 is well-equipped with multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players, gaming consoles, and streaming devices. It supports 4K video pass-through and upscaling, allowing users to enjoy high-definition content with stunning clarity. The receiver also features ARC (Audio Return Channel) functionality, simplifying sound output from compatible TVs.

The AVR280 utilizes Arcam's proprietary Class G amplification technology, which strikes a balance between efficiency and audio fidelity. This innovative design minimizes distortion, ensuring a clean and detailed sound reproduction across all frequencies. Additionally, the room correction technology integrated into the AVR280 automatically calibrates the audio output based on the acoustics of the room, optimizing performance for different setups.

An intuitive user interface and easy setup process enhance the overall user experience. With a sleek design, the AVR280 seamlessly fits into various home entertainment environments while offering a range of customizable options to suit individual preferences.

For those who prioritize streaming capabilities, the AVR280 is compatible with various streaming services, allowing users to enjoy their favorite music with ease. Overall, the Arcam AVR280 stands out as a versatile and powerful AV receiver, making it an excellent choice for anyone looking to elevate their home theater experience with premium sound and video quality.