Video connections

VCR OUT, dr

The AVR280 allows for conversion between different video formats. This means that the AVR280 can convert between composite, S-video and component, if required. For example, if you are watching a composite input from a VCR, you may view it from the S-video or Component/RGB video outputs of the AVR280. This allows you to use a single (typically high-quality Component/RGB) connection between the AVR280 and your display device.

The record loops do not work from the video converter. This means that to record a S-video or composite signal, a Svideo or composite signal (respectively) must be supplied.

The following video conversions are possible:

To:	Composite	S-video	Component/
From:			RGB

Composite	Yes	Yes	Yes

S-video	Yes	Yes	Yes

Component/	No	No	Yes
RGB

Note that conversion between RGB and Component video (or vice-versa) is not supported by the AVR280.

Composite/S‑video video connections

dm dn MONITOR OUT.

Two video output connectors are provided, one for SVideo and one for composite video. The outputs carry the same information at all times (and both may be used simultaneously, if required).

Connect one of these outputs to the video input of your display device.

dq VCR IN, ds AUX IN, dt AV, ek SAT, el DVD.

Connect the composite video outputs of your source equipment to these inputs. The choice of connection to use (S‑video or composite) depends on where the signal is to be routed to: if the signal is to be used in Zone 2, then a composite connection is required; if the signal is to be used for recording (routed to a VCR, for example), then the connection type must match the connection to the recording device (i.e., if the recording device requires a S‑video signal, then a S‑video connection from the source equipment must be used).

If both connections are made, the signal from the S‑video input will be used for the main zone if no Component/RGB signal is supplied.

dp AUX OUT.

Connect one of the S‑video or composite video outputs to the video input of your VCR or AUX. The connection used must match the video type of the source you wish to record (as described above). For example: if you wish to record a S‑video signal from your satellite receiver on your VCR, the connection to the VCR must also use S‑video.

High quality (Component) video connections

��

These inputs are suitable for connection to component (YUV/YCrCb) or RGB outputs. These

signals are usually available from a DVD player, set-top box or games console and offer the ��

best possible picture quality.

Note that the high-quality component video connections operate independently of the
composite/S-video connections.	��				��
Generally, the component video standard is used in North America/NTSC regions, while RGB					��
is used in Europe.	��				��
is used in Europe.

em AV, eo DVD, ep SAT INPUTS. Connect the video outputs of your high-quality video sources			��

to these inputs.
to these inputs.		��		��
en HIGH QUALITY VIDEO OUT. Connect these sockets to the component video inputs of your		��		��
display device.
Important notes about HQ-video inputs and outputs
< In the ‘Video Settings’ set-up menu, each of these three high-quality component video
inputs can be allocated individually to any of the other inputs, e.g., the input labelled
		When you connect
‘DVD’ does not have to be used for DVD, but can be used for something else. See page		When you connect
14 for further details.		your devices to these
< You cannot mix component and RGB sources. Selection of component or RGB can be		connectors, take care to

		follow the letter/colour
made in the Set-up menu ‘General Settings’ page (see page 10).		follow the letter/colour

		coding for each input.
< The high-quality component video inputs have sufficient bandwidth for line-doubled		coding for each input.
		No damage will occur if
NTSC (525/60) or PAL (625/50) video (‘progressive scan’) and also US HDTV video		connected incorrectly,
signals. However, when used with such signals the OSD is not overlaid on the picture		but unusually coloured
but is output at standard interlaced NTSC or PAL (525 or 625 line) rate on a solid		or unstable pictures will
background.		result.

<When using the HQ-video inputs, the composite and S-video outputs will be muted. This is because the processing for the on-screen display would create invalid video signals on these outputs.

SCART RGB 4-wire connection

(SCART refers to the multipole A/V connector used commonly on European A/V equipment.)

Some video projectors and most European TV sets require the use of a 4-wire RGB connection, where the ‘sync’ signal is separate from RGB. In this case, you need to use the composite video MONITOR OUT dn for the sync information. A cable is available from your dealer to make this 4-wire RGB connection (refer to the table of SCART connections at the back of the manual). Note that use of this feature requires (in addition to the RGB connections) a composite video connection between the source and the AVR280, in order to supply the additional synchronisation signal.

Note that most SCART TV inputs will require the SCART RGB status line to be controlled before the RGB signal will be displayed. The RGB trigger output will control this signal when connected to the SCART socket using a cable of the type given on page 32. These cables are available from your dealer.

The AVR280 does not support either 5-wire RGB HV or 3-wire RGB sync-on-green connections.

AVR280

AVR280 specifications

The Arcam AVR280 is a high-performance AV receiver designed to deliver an immersive home theater experience. Known for its robust build quality and advanced technological features, it caters to both audiophiles and casual users seeking top-notch sound and video quality.

One of the standout features of the AVR280 is its power output. The receiver is equipped with an impressive 7-channel amplification system, providing 80 watts per channel into 8 ohms. This ample power ensures clear and dynamic audio reproduction, making it ideal for driving demanding speaker systems and creating a rich soundstage. The AVR280 also supports Dolby TrueHD and DTS-HD Master Audio, ensuring superior sound quality for high-definition movie formats.

In terms of connectivity, the AVR280 is well-equipped with multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players, gaming consoles, and streaming devices. It supports 4K video pass-through and upscaling, allowing users to enjoy high-definition content with stunning clarity. The receiver also features ARC (Audio Return Channel) functionality, simplifying sound output from compatible TVs.

The AVR280 utilizes Arcam's proprietary Class G amplification technology, which strikes a balance between efficiency and audio fidelity. This innovative design minimizes distortion, ensuring a clean and detailed sound reproduction across all frequencies. Additionally, the room correction technology integrated into the AVR280 automatically calibrates the audio output based on the acoustics of the room, optimizing performance for different setups.

An intuitive user interface and easy setup process enhance the overall user experience. With a sleek design, the AVR280 seamlessly fits into various home entertainment environments while offering a range of customizable options to suit individual preferences.

For those who prioritize streaming capabilities, the AVR280 is compatible with various streaming services, allowing users to enjoy their favorite music with ease. Overall, the Arcam AVR280 stands out as a versatile and powerful AV receiver, making it an excellent choice for anyone looking to elevate their home theater experience with premium sound and video quality.