To Remove Your Bassinet
Step 1.
Remove the mattress from your bassinet.
Step 2.
Unsnap the end flaps from your Pack ’N Play.
Step 3.
Pull back the fabric at one corner of the bassinet to find the red spring latch.
Step 4.
Pull the red spring latch back and lift up the tube.
Step 5.
Pull the tube out of the bassinet and set aside.
Step 6.
Repeat steps 3, 4 and 5 to remove the other tube.
Step 7.
Use extreme care when pulling the tubes apart.
Pull the tubes apart by twisting the tubes as you pull. Store the tubes in the pockets in the bassinet.
ACCESSORY INSTRUCTIONS ON CERTAIN MODELS*
Side Flap*
You can raise side flap if desired.
Unfasten VELCRO® straps at bottom of flap. Roll flap up. Fasten in place with snap loops at top.
Cargo Bag*
The cargo bag can be snapped onto the end of the Pack ’N Play for easy access. Unzip both ends and tuck inside the bag.
Maximum weight 5 lbs (2.3 kg).
11
Casters*
To apply the locks, push
DOWN on the levers.
To release the locks, lift UP on the levers.
Wheels*
To apply the locks, push DOWN on the levers.
To release the locks, lift UP on the levers.
Parent Organizer*
Always keep objects out of child’s reach. Remove parent organizer when child is able to pull himself up in the Pack ’N Play.
Step 1.
Your parent organizer includes two plastic dividers.
Slide the plastic dividers into the two pockets in the section dividers of the parent organizer.
Step 2.
Slide the tube into the mounts on the end of your unit.
Push the button in to get it started.
Pull up on the parent |
|
organizer to make sure |
|
that the buttons are |
|
caught on the bottom |
|
of the mounts. | Button |
Step 3.
To remove the parent organizer push in on the buttons on the bottom of the tubes and pull up.
12