The First Years Swing Gate manual ENG CDN Pressure mounting, ENG CDN To clean, ENG CDN Service

Page 8

ENG CDN Pressure mounting (cont.)

To use

To open gate

Holding the release handle with one hand, first use your thumb to push and slide the release button that is most comfortable for you, then lift up on the release handle. With both hands grasping the carry handle, slide gate up and out of doorframe.

To reinstall gate

Lift release handle up. Slide gate back into place in the doorframe and push release handle down to lock.

!WARNING:

When repositioning, always check that the adjustment knobs are in firm contact with the doorframe and that the release handle is in the locked position. ALWAYS retest the gate for security after positioning.

ENG CDN To clean

Wash with warm water using mild liquid soap. Use a soft cloth to avoid scratching the panels. Rinse with clear water and wipe dry with a soft cloth.

NOTE: Never use solvents, chemicals, scouring powders or sharp tools when cleaning the panels or gate.

ENG CDN Service

Replacement or additional parts should only be obtained from The First Years.

Please contact our Parent Service Center: 1-800-533-6708 or www.thefirstyears.com.

Satisfaction Guaranteed

If you are not completely satisfied with this product, please call our Parent Service Center at the toll-free number above.

USA/Canada: The First Years Inc., Avon, MA 02322-1171, U.S.A. Toll-free: 1-800-533-6708.

This product complies with the following standard: ASTM F1004 ©2004 The First Years Inc., Avon, MA 02322-1171

4996.06.29.04

8

Image 8
Contents All-Clearswing gate ENG CDN Contents ENG CDN Safety Instructions Hardware vs. Pressure Mount UsageTwo-way swing ENG CDN To installHardware mounting for swing-thru convenience Hang gate in hinge brackets ENG CDN Hardware mountingAttach hinge brackets Attach safety brackets Adjust widthSafety Bracket To usePressure mounting/Adjusting width Panels out to adjustENG CDN To clean ENG CDN ServiceSatisfaction Guaranteed To reinstall gate